Used Signal Analyzers

Keysight Technologies 35665A
- used
- Manufacturer: Agilent - Keysight
- Model: 35665A
Details The Keysight (Agilent) 35665A is a 2-channel Dynamic Signal Analyzer tailored for vibration, acoustics, and control system analysis. It offers one-channel measurements up to 102.4 kHz and dual-channel mea...
Dublin, Ireland
National Instruments NI-9263
- used
- Manufacturer: National Instruments
Details The National Instruments NI-9263 offers 4 analog outputs with a ±10V range, 16-bit resolution, and a 100 kS/s per channel simultaneous sampling rate, ensuring precise and high-speed signal generation for ...
Dublin, Ireland
Huntron TRACKER 3200S
- used
Details The Huntron TRACKER 3200S Analog Signature Analyzer is a sophisticated diagnostic tool designed to test electronic components and circuit boards using analog signature analysis. It features three 64-pin s...
Dublin, Ireland
Rohde & Schwarz FSQ8
- used
- Manufacturer: Rohde & Schwarz
- Model: FSQ8
Details The Rohde & Schwarz FSQ8 offers a 20 Hz to 8 GHz frequency range, 1 Hz to 50 MHz resolution bandwidth (RBW), and a demodulation bandwidth up to 120 MHz. With -154 dBm DANL, it supports detailed signal ana...
Dublin, Ireland
Rohde & Schwarz FSUP8
- used
- Manufacturer: Rohde & Schwarz
- Model: FSUP8
Details The Rohde & Schwarz FSUP8 combines a high-end spectrum analyzer and phase noise tester, offering exceptional dynamic range through cross-correlation up to 50 GHz. It supports measurements using the phase ...
Dublin, Ireland
Wandel & Goltermann SPM15 Selective Level Meter
- used
- Manufacturer: Wandel & Goltermann
Details The Wandel & Goltermann SPM‑15 is a precision selective level meter covering 50 Hz to 10 MHz with quasi-continuous tuning. It features an integrated tracking generator (PSE‑15) for swept signal testing, a...
Dublin, Ireland
Keysight Technologies CX3322A
- used
- Manufacturer: Agilent - Keysight
- Model: CX3322A
Details The Keysight (Agilent) CX3322A offers 2 analog channels and supports various current and differential sensors for precise current waveform measurements. It features bandwidth options of 50 MHz, 100 MHz, o...
Dublin, Ireland
Keysight (Agilent) E4406A
- used
- Manufacturer: Agilent - Keysight
- Model: E4406A
Details The Keysight (Agilent) E4406A VSA Series Transmitter Tester operates across 7 MHz to 314 MHz and 329 MHz to 4 GHz, offering a wide range of digital modulation analysis capabilities. With its built-in, sta...
Dublin, Ireland
National Instruments NI-9237
- used
- Manufacturer: National Instruments
Details The National Instruments NI-9237 is a high-precision data acquisition module featuring 4 simultaneous analog inputs with a sensitivity of 25 mV/V, 24-bit resolution, and a sampling rate of 50 kS/s per cha...
Dublin, Ireland
Keysight Technologies CX1102A
- used
- Manufacturer: Agilent - Keysight
- Model: CX1102A
Details The Keysight (Agilent) CX1102A Dual Channel Current Sensor enables high dynamic range current measurements from 40 nA to 1 A across two synchronized channels with a 100x range difference. It operates with...
Dublin, Ireland
Rohde & Schwarz FSUP26
- used
- Manufacturer: Rohde & Schwarz
- Model: FSUP26
Details The Rohde & Schwarz FSUP26 is a precision signal source analyzer with a frequency range up to 26.5 GHz, integrating spectrum analyzer, phase noise tester, and vector signal analyzer in one. It enables adv...
Dublin, Ireland
Rohde & Schwarz FSQ3
- used
- Manufacturer: Rohde & Schwarz
- Model: FSQ3
Details The Rohde & Schwarz FSQ3 is a powerful signal analyzer covering 20 Hz to 3.6 GHz with 1 Hz to 50 MHz RBW and -158 dBm DANL. It supports a wide 120 MHz demodulation bandwidth and is ideal for WLAN, 3GPP, G...
Dublin, Ireland
Rohde & Schwarz FSW85
- used
- Manufacturer: Rohde & Schwarz
- Model: FSW85
Details The Rohde & Schwarz FSW85 Signal and Spectrum Analyzer features a wide 5 GHz analysis bandwidth and an ultra-low phase noise of –137 dBc (1 Hz) at 10 kHz offset, ideal for precise signal evaluation. It su...
Dublin, Ireland
Microsemi 8040C
- used
Details The Microsemi 8040C Rubidium Frequency Standard is a high-precision rubidium frequency standard designed for applications requiring exceptional stability and accuracy. It provides 10 MHz and 5 MHz outputs...
Dublin, Ireland
National Instruments NI-9236
- used
- Manufacturer: National Instruments
Details The National Instruments NI-9236 is an 8-channel C Series Quarter Bridge Input Module designed for precise strain and force measurements. It supports quarter-bridge configurations with high-resolution del...
Dublin, Ireland
Agilent - Keysight 35670A-1D4 Signal Analyzer
- used
- Manufacturer: Agilent - Keysight
- Model: 35670A-1D4
Good condition Agilent - Keysight 35670A-1D4 Signal Analyzers. Located in USA and other countries. Click request price for more information.
USA