Used Saws

Northtech NT ADS-100A Automatic Crayon Mark & Defect Saw

With feed speeds up to 240 FPM and up to 80 highly accurate cuts per minute, the NT ADS-100A processes up to 3-5 times more material than manual cut-off saws. The precision computer-controlled servo consistently ...

18" x 22" DOALL TM-1822 Vertical Saw

• Manufacturer: DoAll
• Model: TM-1822

DOALL VERTICAL MODEL TM-1822 Throat: 18" | Work height: 22" | Power: 5hp | Blade width: 1.25" | Blade length: 196" | Weight approx. (lbs.): 2,800 lbs | Electrics: 480V/3PH/60H

1992 Trennjaeger TS-3 Automatic Traversing Cold Saw ()

• Manufacturer: Trennjaeger

Trennjaeger TS-3 Automatic Traversing Cold Saw (1992) Work piece width 39.7" Workpiece height 11.81 Total power requirement 25 HP Motor power, 8 HP The industrial saw in the H-beam design from Trennjaeger has a ...

2018 DoAll DC-300 CNC Horizontal Band Saw ()

• Manufacturer: DoAll
• Model: DC-300CNC

Imperial Metric DoAll DC-300 CNC Horizontal Band Saw (2018) Specs: Band Drive: Motor HP- 5 Hp Band Speed -65-328 fpm Band Tension-Hydraulic Hydraulic System: Motor HP- 1 Hp Reservoir Size 16 Gallon Coolant System...

Roll-in Saw JM1220 - The Journeyman 1220 #8873

• Manufacturer: Roll-In

Roll-in Saw 12″ x 20″ Vertical Band Saw with Tilting Table, JM1220 Inventory # 8873 From the digital speed control to the calibrated gravity fed tilt-table, the “Journeyman 1220” sets the standard for versatility...

Grizzly "G9744Z2" Band Saw

• Manufacturer: Grizzly
• Model: G9744Z2
• Phase type: Single-phase

Grizzly "G9744Z2" Band Saw 1-1/2 hp motor 4 blade speeds 121-1/2" blade length 10" max round cutting 18" width at 90 degrees 2.5 gallon cooling capacity

2012 MARVEL SPARTAN Model PS 2828/10 Plate Saw

• Manufacturer: Marvel
• Model: PS2828

2012 MARVEL SPARTAN Model PS 2828/10 Plate Saw EQUIPPED WITH --- MOVEMENT VIA HYDRAULIC CYLINDER ON GROUND SQUARE WAYS HYDRAULICALLY CLAMPED CARBIDE BLADE GUIDES WITH HYDRAULIC CONTROLLED UPPER BLADE GUIDE ARM SP...

Keller Band Saw

• Manufacturer: Keller

Keller Band Saw Operational when removed from service Dayton Motor Model #: 5K916B ***SOLD AS IS, WHERE IS*** ***SHIPPING IS NOT AVAILABLE*** The buyer is responsible for all aspects of pick-up / removal, includi...

SHARP Mitering Semi-Auto Horizontal Band saw Model SW-165HT

• Manufacturer: Sharp

SHARP Mitering Semi-Auto Horizontal Band saw Model SW-165HT This is a semi automatic miter saw with saw frame that can swivel 0° to 60° for cutting work pieces. Angle change is facilitated by pivot system for acc...

2025 W.F. WELLS S 40 3C Horizontal Saw, 40" x 40" Capacity

• Manufacturer: W.F. Wells
• Model: S-40

2025 W.F. WELLS S 40 3C Horizontal Saw, 40" x 40" Capacity OPTIONAL FACTORY INSTALLED ACCESSORIES Description Order Number Price Discharge Worktable 40" Wide X 56" Long 0056225 $6,825.00 Hydraulic Chip Conveyor 0...

Roll-in Saw TF1420 - Vertical Tilt Frame #8874

• Manufacturer: Roll-In

Roll-in Saw 14″ x 20″ Vertical Tilting Band Saw, TF1420 Inventory # 8874 The TF1420 is actually a horizontal band saw on a vertical frame. This all-purpose saw handles all metals, plastics, and woods in a wide va...

Roll-in Saw DT1340 - Deep Throat Journeyman #8875

• Manufacturer: Roll-in Saw

Roll-in Saw 13″ x 40″ Vertical Band Saw, DT1340 Inventory # 8875 “The Deep Throat Journeyman” is designed for large jobs that require large levels of complexity and accuracy. This saw has the strength of our othe...

Baileigh BS-250M Mitering Band Saw

• Manufacturer: Baileigh
• Model: BS-250M

Baileigh BS-250M Mitering Band Saw The BS-250M horizontal bandsaw from Baileigh Industrial is a great saw for any fabrication shop that cuts a variety of materials and profiles. The BS-250M is an inverter driven,...

WHIRLWIND 212R, CUT-OFF SAW WITH INFEED AND OUTFEED

• Manufacturer: Whirlwind

WHIRLWIND 212R, CUT-OFF SAW WITH INFEED AND OUTFEED S/N:, (230/460/60/3 electrics), H-2088 Standard Specifications: *Inquire for additional specifications*