Used Processing in Germany

Cutting unit WOLF - for KS-350, painted

• Manufacturer: Wolf

Used. Groove kernel cutting machine PEHA - Type H1-04-03-600 with approx. 600 mm working widt

• Manufacturer: PEHA

The nuts are fed through the feed hopper into the slicing system by a continuously adjustable vibrator with feed channels. In the slicing system, the product is sliced into cubes using three disc knife shafts. Ou...

almond halving machine PEHA - approx. 600 mm working width, YOM 1983.

• Manufacturer: Peha

The machine is suitable for cutting almonds and similar nuts into halves. The machine is equipped with a cutting knife and two rubber rolls.

1967 BÜNDGENS UD2

• Manufacturer: BÜNDGENS

Info: double wire processing | Diameter range: 0,8-2 mm | Cutting length: 1000 mm | Speed – meters/min: 80

Almond sticks machine PEHA, Germany - type H1-04-600 with approx. 600 mm working width.

• Manufacturer: Peha

The almonds are fed into the hopper and go into the slicing system by a stepless vibrator with feeding channels. In the slicing system, the product is cut into sticks by using two knife shafts. Production capacit...

1961 BÜNDGENS UD2

• Manufacturer: BÜNDGENS

Info: double wire processing | Cutting length: 1000 mm | Diameter range: 0,8-2 mm | Speed – meters/min: 80

2018 Vernet-Behringer MAG EVO 420 Cutting and Drilling System Panel Processing Center

• Manufacturer: Vernet Behringer

Cutting and Drilling System Panel Machining Center CNC Control Kjellberg HiFocus 360 Power Source Automatic Turret (750 x 400 mm with limitations) Infeed Side: Zeroing Cross Conveyor NC Feed Carriage, Laterally P...

2013 Kemet Arctronics SC/R295C Kemet Arctronics - Press Machine

Ideally suited for pressing, punching or forming processes Automation and repeatable processes

2022 Trained+ Huser Micropilot FMR60 Radar Level Sensor NEW (5x)

Suitable for demanding tanks/containers with internals NEW Goods

2018 Polystat 300S SERVITEC - Laboratory Press

Massive laboratory or technical press Hydraulic system in the substructure, closed machine housing

autosampler Waters 717+ - type.

2x WEBER DS 88 - 17D complete original process units

• Manufacturer: Weber

Complete conversion kit from the old degassing position to the upstream degassing position - suitable for PVC window recipes, dryblend processing - enlarged preheating zone - all parts unused in original packing ...

Insulating sleeve for SDE-tank (1.150 liter)

Other: - Height: approx. 900 mm- without hole for heating connections

Hinged lid with spraying lip for SDE 550 litres

Ystral jet stream mixer, Aisi 304

• Manufacturer: Ystral

remarks: 1 tank with slightly different dimensions (inner diameter: 3800 mm; outer diameter: 3920 mm; cylinder height: 4100 mm)