Used Processing in Bremen, Germany

1000 liter tank, Aisi 304 with jet stream mixer

• Manufacturer: Ystral

remarks: Total height estimated (deviations possible); Agitator supports may need to be relined for installation; Diameter outlet end approx. 35 mm EX-proof: motor is ex-proof (compliance with the new ATEX direct...

2500 liter rectangular tank, Aisi 304

remarks: Basic dimensions inside: approx. 1,100 x 1,100 mm; Internal wall height: approx. 2,150 mm; light protective paint on the outside (no longer completely complete); Manhole diameter approx. 490 mm; slight d...

1000 liter IBC container, Aisi 304

remarks: Frame, Fe (galvanized; partly slightly bent); slight differences in design possible; Ball valve made of brass (nickel-plated); Diameter manhole approx. 420 mm (for 1 container the manhole is slightly pre...

68000 liter horizontal pressure tank, Aisi 304 (food-grade)

max. allowable working temperature: 20 °C remarks: A fourth identical tank can be made available upon request.

570 liter heat-/coolable pressure tank, Aisi 304

Temperature control cylinder (dj): half-coil Technical documentation: drawing,various documents ,certificate of inspection material temperatur control system: AISI 304 (V2A) 1.4301

11800 liter tank, Aisi 304

remarks: With 1 tank, the cylinder is marbled on the outside

5000 liter tank, Aisi 304

remarks: Manhole approx. 320 x 420 mm; Tanks marbled on one side on the outside; the foot lengths on the individual tanks are slightly different (usually 1 foot is shorter than the other two feet; the feet would ...

10000 liter tank, Aisi 304

remarks: Manhole approx. 320 x 420 mm; Tanks marbled on one side on the outside; the foot lengths on the individual tanks are slightly different (usually 1 foot is shorter than the other two feet; the feet would ...

2400 liter heat-/coolable tank, Aisi 304

Temperature control cylinder (dj): double jacket remarks: Manhole approx. 345 x 455 mm; 1 dent in the insulation jacket (see photos) material temperatur control system: AISI 304 (V2A) 1.4301

300 liter mobile tank, Aisi 304

remarks: 1 strong dent in the upper cylinder area and 1 kink in the outlet pipe (see photos)

1000 liter pressure tank, Aisi 304

remarks: Tanks screwed into frame, Aisi 304; 1 hand hole diameter approx. 350 mm in the front base (hand hole cover made of plastic)

3000 liter pressure tank, Aisi 316

• Manufacturer: Waldner

max. allowable working temperature: 130 °C notice: some residues of previous content, Metallic discolouration inside

500 liter tank, Aisi 304

remarks: Tank slightly out of round; Parts of the butterfly valve are lower than the lower bottom (take this into account when setting up the tank); outlet slightly curved upwards; Tank with dents in the transiti...

8000 liter insulated tank, Aisi 304 with lateral propeller agitator

remarks: Minor differences in the design of the two tanks (e.g. location of the outlets); Manhole diameter approx. 510 mm; a former manhole and 1 connection in the lower cylinder area were welded shut by the prev...

900 liter oval tank, Aisi 316

Volume: 900 liter | Stand type: legs height adjustable | Quantity legs: 4 Piece | Total height: 1.330 mm | Total width: 760 mm | Total length: 1.850 mm | Technical equipment: butterfly valve, spray ball | Outlet...