Used Processing in Bremen, Germany

80 liter heat-/coolable process vessel, AISI 304 with coax agitator and wall scraper

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket

1540 liter heatable/coolable process tank made of stainless steel 304 with 2 agitators & homogenizer

• Manufacturer: Diessel

max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 6.0 bar Temperature control cylinder (dj): double jacket remarks: Homogenizer on the underbody (see photos) is included in the ...

1190 liter heatable/coolable pressure-resistant process tank made of stainless steel 304 with propeller agitator

• Manufacturer: Diessel

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 4.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 150 °C Temperature control ...

9140 liter heat-/coolable pressure tank, Aisi 304

max. allowable working temperature: 200 °C max. allowable working temperature (dj): 242 °C remarks: Maximum operating pressure heating coil 35 bar; 3 support brackets, Fe; Manhole diameter approx. 490 mm; several...

Tetra Pak hot tube holder, Aisi 304

• Manufacturer: TETRA PAK PROCESSING

Other: 8 minutes hot hold Pipes DN 80 Length: 647 meters Manufacturer: Tetra Pak Weight approx. 7 t remarks: Wall thickness of pipes 2 mm (1.7 mm in curved areas); 6 height-adjustable feet; smaller dents in the i...

Stainless steel 316 propeller agitator

Other: Total length approx. 1,300 mm | Manufacturer stirrer: PRG | Agitator: propeller | Output speed: 1445 rpm | Voltage: 230/400 Volt | Power: 3 KW | Material in contact w/ medium: AISI316 1.4401 / 1.4404 | Sh...

Dispersing agitator made of stainless steel

• Manufacturer: ALFA-LAVAL

Other: Stirrer shaft material: 1.4401 (stainless steel 316) Stator basket material: 1.4541 (stainless steel 304) Total length approx. 1,450 mm EX-proof: motor is ex-proof (compliance with the new ATEX directives ...

Propeller agitator, Aisi 316

agitator features: Agitators are each bolted to lateral agitator flanges cut out of a tank and made of 1.4571 (Aisi 3106).

Geared agitator 3 KW made of AISI 316 with 3 blades and 220 cm shaft length

• Manufacturer: Behälter KG

Other: Total flange diameter approx. 315 mm Bolt circle diameter approx. 270 mm 4 holes of 24 mm each

Brand-new 4,0 KW / 1500 rpm high-speed propeller mixer-FIT/SL

• Manufacturer: Behälter KG

Technical documentation: drawing | Agitator: propeller | Agitator positioning: eccentrically in the upper bottom | Output speed: 1500 rpm | Voltage: 400 Volt | Power: 4.0 KW | Material in contact w/ medium: AISI...

Tripod agitator, Aisi 316

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

Inclined blade agitator, Aisi 304

agitator features: Plastic intermediate flangeStirring blades partially slightly bent

Alfa Laval 1.3 m² spiral heat exchanger, stainless steel

• Manufacturer: Alfa-Laval

Other: Permitted Operating temperature: 200° C Channel A: Capacity: 7 liters Permitted Operating pressure: -1/+5 bar Gap width: 5 mm Medium: LMFChannel B: Capacity: 7 liters Permitted Operating pressure: 5 bar Ga...

Heat exchanger, stainless steel

• Manufacturer: GEA

Other: Room I:- max. all. work. pressure: -1/+5 bar- max. all. work. temperature: 135° C- volume: 10 LiterRaum II:- max. all. work. pressure: -1/+2 bar- max. all. work. temperature: 135° C- volume: 40 Liter1 heat...

Heat exchanger, stainless steel

• Manufacturer: GEA

Other: Room I:- max. all. work. pressure: -1/+5 bar- max. all. work. temperature: 135° C- volume: 7 LiterRaum II:- max. all. work. pressure: -1/+2 bar- max. all. work. temperature: 135° C- volume: 22 Liter1 heat ...