Used Processing in Ontario, Canada

Kady Disperser

• Manufacturer: Kady

-MFG: KADY -MODEL: 25 T -9'' ROTOR/STATOR MILLING HEAD -BUILT IN OIL RESERVOIR -MOTOR: 575 VOLT

Immersion mixer blender

-Weg Motor: 575V, 3phase, - explosion proof - 1740 RPM, 5.0 HP, 5.60 AMPS -40" shaft

Donaldson air Filter Unit DWS6 7.5 HP

• Manufacturer: Donaldson / Torit / DCE

-Shipping: 54” length x 50” width x 102” height -Electrical: 208-460/60/3 -Motor HP: 7.5 HP -Filter part number: P191889 -Model: Dws6

Donaldson air Filter Unit DWS6

• Manufacturer: Donaldson / Torit / DCE

-Shipping: 54” length x 50” width x 102” height -Model: Dws6 -208-460/60/3 Volts -Filter part number: P191889

Filter Regulator

• Manufacturer: Festo

-Shipping dimensions: 2" L x 2" W x 4" H -Input/output: 1/2" -P1 max: 21 bar/300 psi -P2 max: 10 bar/145 Psi

Filter Regulator

• Manufacturer: Festo

-Shipping dimensions: 2" L x 2" W x 4" H -Input/output: 1/2" -P1 max: 21 bar/300 psi -P2 max: 10 bar/145 Psi

Filter Regulator

• Manufacturer: Festo

-Shipping dimensions: 2" L x 2" W x 4" H -Input/output: 1/2" -P1 max: 21 bar/300 psi -P2 max: 10 bar/145 Psi

Festo Filter Regulator

• Manufacturer: Festo

-Shipping dimensions: 2" L x 2" W x 4" H -Input/output: 1/2" -P1 max: 21 bar/300 psi -P2 max: 10 bar/145 Psi

1400 Litres open top steel tank

-Open top -Flat bottom -Tank dimensions: Height 60"/ 5ft x Diameter 43" x outlet 2" -Height from outlet to the ground: 8.5" -Total height: 78"

940 Litres stationary tank

-Open top with lid -Stationary with fork lift accessible flat bottom -Diameter is 32.5" -Height is 47.5" -207 IMP

Lightnin Mixer

• Manufacturer: Lightnin

Model:N33G-33, HP:1/3, Volt:115, Phase:1, RPM:1725,

922 Liter Horizontal Tank

• Manufacturer: Sharpsville Container

-203 IG -MAWP 100 psi @250 F -MDMT -20 F @ 100 psi -9" from the ground to the bottom -64" tall -Certified by Sharpsville container

5 HP Scott Hammer Mill

-Shipping dimensions: length 49" x width 40" x height 30" -Model: Sh18-12 -5 HP -208-230/460 Volts -15-23.2/6.6 AMPS -1725 RPM -3 phase

11,383 Liter Double walled plastic tank

-Double walled -Flat bottom -Plastic -Closed top -2,504 IMP

7,169 Litres steel tank

-Tank dimensions: 145" tall x 62" -Cone bottom with a 3" drain -Top with lid -On steel legs -1,500 imperial gallon tank -Shipping dims: 180" long/tall x 70" wide approximately 2000 pounds