Used Processing in Île-de-France, France

Modulo+

• Manufacturer: Babcock Wanson

Modulo+ Gas Burners Fuel available: Natural gas, Liquefied gas From 6 to 20 MW Turn down ratio 1 to 12. Very low NOx operation of ≤ 60mg/Nm³ at 3% O2 (referring to EN676). Minimum excess air over the entire opera...

LNTA & TA

• Manufacturer: Babcock Wanson

LNTA & TA Industrial Burners Fuel available: Natural gas, Liquefied gas, Gasoil, Medium and Heavy Fuel Oils and other specific fuels on request. LNTA: From 3.5 to 10.5 MW. TA: from 9 to 22 MW. LNTA: Fully integra...

Air Preheating R-Eco

• Manufacturer: Babcock Wanson

Principle of operation: Exhaust Gas Combustion Air Preheating Economiser The benefits of "R-ECO" installation are most apparent where there is greater than 90% condensate return. As returning condensate is alread...

REC Series

• Manufacturer: Babcock Wanson

Ideal for producing steam or high temperature water, the REC Series uses combustion gas coming from diesel engines, gas turbines (co-generation), industrial furnaces, incinerators or other thermal equipment. Thes...

TPC-LN Series

Simple Reliable Operation TPC-LN combustion chamber is formed using concentric wound helical coils which form the gas passes. This safe and simple arrangement provides a very generous combustion chamber resulting...

EPC-H Series

High Efficiency The combustion chamber is designed for low thermal load and has a large heat exchange surface resulting in a high thermal efficiency of up to 92%. The heat exchange design also results in optimal ...

TPC-B Series

Simple Reliable Operation TPC-B includes an integral, air-cooled outer case that acts as both a combustion air pre-heater/economiser and as a constant barrier between the hot combustion gases and the outer struct...

2011 DEMAG 420 T/1450 SYSTEC

• Manufacturer: Demag

Type of control: NC 4 | Number of hours: 45 000 H | Storage place: LA FRANCE | Deadline: DISPO | Closing force: 420 T | Opening stroke: 710 mm | Columnar: 810 x 710 mm | Plateaux dimensions: 1200 x 1100 mm | Min...

2012 ARBURG 200T - 570S - 800

• Manufacturer: Arburg

Type of control: SELOGICA | Number of hours: 38 000H | Storage place: MECA PLASTIC | Deadline: DISPO | Closing force: 200T | Opening stroke: 650mm | Columnar: 570 x 570 mm | Plateaux dimensions: 795 x 795mm | Mi...

2013 ENGEL VERTICAL INSERT 80V/110T

• Manufacturer: Engel
• Model: Insert

ROTATING PLATE Type of control: CC200 | Number of hours: 8 000 H | Storage place: MECA PLASTIC | Deadline: DISPO | Closing force: 110 T | Opening stroke: 350 mm | Columnar: rotary table | Plateaux dimensions: rot...

2010 JSW 55T AD 30H ELECTRIC

• Manufacturer: JSW

Number of hours: 56 000 H | Storage place: MECA PLASTIC | Deadline: DISPO | Closing force: 55T | Opening stroke: mm | Columnar: 360x360 mm | Plateaux dimensions: x mm | Mini/maxi mould: 160/420 mm | Max distance...

2001 DEMAG 250T-1450

• Manufacturer: Demag

2 SOUFLETTES Type of control: NC 4 | Number of hours: 37 000 H | Storage place: LA FRANCE | Deadline: DISPO | Closing force: 250 T | Opening stroke: 675 mm | Columnar: 630 x 630 mm | Plateaux dimensions: 950 X 95...

2005 ENGEL 45T-200 VICTORY

• Manufacturer: Engel
• Model: Victory

Type of control: CC100 | Number of hours: 42 500 | Storage place: MECA PLASTIC | Deadline: DISPO | Closing force: 45 T | Opening stroke: 400 mm | Columnar: 500 mm x 450 mm | Plateaux dimensions: 500 mm x 450 mm ...

2009 BATTENFELD 300T/HM 300_2250 Unilog B6S

• Manufacturer: Battenfeld

1 BLOWER Type of control: UNILOG B6S | Number of hours: 17 500H | Storage place: MECA PLASTIC | Deadline: DISPO | Closing force: 300 T | Opening stroke: 550 mm | Columnar: 710 x 630 mm | Plateaux dimensions: 1020...

2012 ENGEL VICTORY ECODRIVE 160T BI MAT

• Manufacturer: Engel
• Model: Victory

sequential, 24 hot runners, viper robot, carpet Type of control: CC200 | Number of hours: 43 372 H | Storage place: MECA PLASTIC | Deadline: DISPO | Closing force: 160T | Opening stroke: mm | Columnar: 850 x 756 ...