Used Processing in Île-de-France, France

REC Series

• Manufacturer: Babcock Wanson

Ideal for producing steam or high temperature water, the REC Series uses combustion gas coming from diesel engines, gas turbines (co-generation), industrial furnaces, incinerators or other thermal equipment. Thes...

TPC-LN Series

Simple Reliable Operation TPC-LN combustion chamber is formed using concentric wound helical coils which form the gas passes. This safe and simple arrangement provides a very generous combustion chamber resulting...

EPC-H Series

High Efficiency The combustion chamber is designed for low thermal load and has a large heat exchange surface resulting in a high thermal efficiency of up to 92%. The heat exchange design also results in optimal ...

TPC-B Series

Simple Reliable Operation TPC-B includes an integral, air-cooled outer case that acts as both a combustion air pre-heater/economiser and as a constant barrier between the hot combustion gases and the outer struct...

ORTHOS

• Manufacturer: Babcock Wanson

ORTHOS Gas Burner Fuel available: Natural Gas, Liquefied Gas From 7 to 22 MW Turn down ratio 1 to 24 Very low NOx operation of ≤ 60mg/Nm³ at 3% O2 (referring to EN676) Minimum excess air over the entire operating...

OPTIMO

• Manufacturer: Babcock Wanson

OPTIMO Forced-Draft Burners Fuel available: Natural gas, Liquefied gas, Gasoil, Medium and Heavy Fuel Oils and other specific fuels on request OPTIMO 1, 2, 3 & 4 cover a large power range: from 700 kW to 12.5 MW ...

2014 ARBURG 400T 820S 4000/1300

• Manufacturer: Arburg
• Model: 820 S

1 blowpipe Type of control: SELOGICA | Number of hours: 31 086 H | Storage place: LA FRANCE | Deadline: MECA PLASTIC | Closing force: 400 T | Opening stroke: 700 mm | Columnar: 820 x 820 mm | Plateaux dimensions:...

2005 JSW 450T EL III 1400 H ELECTRIC

• Manufacturer: JSW

Number of hours: 34 000 H | Deadline: DISPO | Closing force: 450T | Opening stroke: 800 mm | Columnar: 810 x 810 mm | Plateaux dimensions: 1210 x 1210 mm | Mini/maxi mould: 160/420 mm | Max distance between tray...

2010 JSW 55T AD 60H ELECTRIC

• Manufacturer: JSW

Number of hours: 57 000 H | Storage place: MECA PLASTIC | Deadline: DISPO | Closing force: 55T | Opening stroke: mm | Columnar: x mm | Plateaux dimensions: x mm | Mini/maxi mould: 160/420 mm | Max distance betwe...

2002 DEMAG 420T/2300 SYSTEM

• Manufacturer: Demag
• Model: System

wittmann robot Type of control: NC4 | Number of hours: 38 900 H | Storage place: MECA PLASTIC | Deadline: DISPO | Closing force: 420T | Opening stroke: 710 mm | Columnar: 870 x 710 mm | Plateaux dimensions: 1200 ...

2002 DEMAG 100T-420-310

• Manufacturer: Demag

Type of control: NC 4 | Number of hours: 36 000 H | Storage place: LA FRANCE | Deadline: DISPO | Closing force: 100 T | Opening stroke: 500 mm | Columnar: 420 x 420 mm | Plateaux dimensions: 600 mm X 600 mm | Mi...

2011 ENGEL VICTORY ECODRIVE 160T BI MAT

• Manufacturer: Engel
• Model: Victory

8 sequential, hot runners 12/1 24 zones, viper robot, carpet

2011 DEMAG 420 T/1450 SYSTEC

• Manufacturer: Demag

Type of control: NC 4 | Number of hours: 45 000 H | Storage place: LA FRANCE | Deadline: DISPO | Closing force: 420 T | Opening stroke: 710 mm | Columnar: 810 x 710 mm | Plateaux dimensions: 1200 x 1100 mm | Min...

2012 ARBURG 200T - 570S - 800

• Manufacturer: Arburg

Type of control: SELOGICA | Number of hours: 38 000H | Storage place: MECA PLASTIC | Deadline: DISPO | Closing force: 200T | Opening stroke: 650mm | Columnar: 570 x 570 mm | Plateaux dimensions: 795 x 795mm | Mi...

2013 ENGEL VERTICAL INSERT 80V/110T

• Manufacturer: Engel
• Model: Insert

ROTATING PLATE Type of control: CC200 | Number of hours: 8 000 H | Storage place: MECA PLASTIC | Deadline: DISPO | Closing force: 110 T | Opening stroke: 350 mm | Columnar: rotary table | Plateaux dimensions: rot...