Used Presses in Saxony, Germany

Hydraulic C-frame press MÜLLER WEINGARTEN CD40.1.94

• Manufacturer: Müller Weingarten

SN: 242040, press force 40 t, stopping time 60 ms, safety distance 100 mm, operating unit, two-hand operation

Hydraulic press, C-frame WMW Zeulenroda (grid) PYE 63S / 1M

• Manufacturer: Zeulenroda
• Model: PYE 63

Hydraulic C-frame press MÜLLER WEINGARTEN CD63.11.21-4

• Manufacturer: Müller Weingarten

SN: 580384, pressing force 63 t, overtravel 25 mm, operating unit, work table, base area approx. 400 x 700 mm

Hydraulic C-frame press MÜLLER WEINGARTEN SD16.11.47

• Manufacturer: Müller Weingarten

SN: 10100, run-on time 80 ms, two-hand operation, chair

STROMAG hydraulic brake

Hydraulic brake, Brake, Hydraulically released spring-applied multi-disc brake STROMAG KMB 80 H 276119/10 777X00315 as good as new, tested ! (installed and dismantled again)

Brass screw press 2.2 kW #B17352

• Manufacturer: IMC

Screw press dewatering press sludge press screw separator used with 2 counter-rotating parallel screws screw diameter approx. 150 mm Screw and sieves made of brass, rest steel Feed hopper approx. 400 x 500 mm Dri...

Workshop press 100 t 100t M/H-M/C-2

Condition: New machine Pressing force [kN]: 980 Table size [mm]: 1500 Stroke of the bear [mm]: 380

2001 Staufermatic Type 112

• Manufacturer: Staufermatic

Serial No.: M-1971 Control Siemens Simatic OP17

1965 Pellesier HHP 160

• Manufacturer: Pellesier

loaded free, truck pressure 160 t stroke 400 mm table-size 1150 x 350 mm diameter of piston 300 / 185 mm throat 225 mm speed of pressing 16....6 mm/sec pre-running speed 75 mm/sec return speed 208 mm/sec total po...

1970 WMW k.A.

• Manufacturer: WMW

5 pcs abor presses No. 2: throat 105 mm; distance ram-table 95 mm; ram stroke 36 mm; table L:120 x w:140 mm; weight 17 kg; dimesnions L:270 x W:220 x H:420 mm No. 3: throat 90 mm; distance ram-table 190 mm; ram s...

1980 BERG & SCHMID DP

• Manufacturer: Berg & Schmid
• Stroke length: 45 millimeter

The height of the plunger can be adjusted by loosening the Allen screws to 140 mm using the hand crank. Plunger holder Ø 10mm with return spring Base with 2x clamping hole Ø 12mm

FRIMO Pressure Transmitter Double Punching Machine – Year 2008 – Precision Punching Technology

general • Brand: FRIMO • Type: Double punching line • Year of construction: 2008 • Serial number / Com No.: 1819101-0 / S.18191.0040 • Capacity (t): 50 t • Drive: Electric-hydraulic • Number of columns: 4 columns...

2011 KUNKEL DZ 160

• Manufacturer: KUNKEL

ex Works, loaded free, truck pressure 160 t Minimum support distance 550 Maximum support distance 1550 Max. workpiece width 400 cylinder stroke 450 mm daylight - horizontal 400 mm total power requirement 18,5 kW ...

1978 VEB PRESSENBAU DESSAU PYXWM 160

• Manufacturer: VEB PRESSENBAU DESSAU
• Stroke length: 500 millimeter
• Power requirement: 11 kilowatt

HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. lengt...

LEINHAAS DWP 63 CN

• Manufacturer: LEINHAAS
• Power requirement: 11 kilowatt

DIFFERENTIAL PATH PRESS HIGH SPEED PRESS - High-speed press, C-stand - Compressed air connection: approx. 5 bar Condition. Press is not under power, without switch cabinet, sale as is. - Documentation available i.D.