Used Machining Centers in Hesse, Germany

HILMA (wahrscheinlich) SM 160

• Manufacturer: Hilma

Add-on Used hydraulic machine vice, on a rotating plate Accessories Pull-down clamping jaws No. 372204

1979 ALLMATIC 125

• Manufacturer: ALLMATIC

Add-on Little-used and very well-preserved mechanical high-pressure machine vice, pneumatically operated (instead of a hand crank) Accessories Built-in rotating plate, two longitudinal support surfaces for securi...

2017 MAZAK INTEGREX i-200S

• Manufacturer: Mazak
• Model: INTEGREX I-200 S

Control: Mazatrol Smooth X 5-axis simultaneous machining | Max. turning diameter: 658 mm | Max. turning length: 1.011 mm | Traverse: X-axis: 615 mm Y-axis: 260 mm Z-axis: 1,077 mm B-axis: -30 to 210° | Rapid tra...

T-slot plate

Addition Used T-slot plate with flange ribbing on the base Further information Surface clean and flat, T-slots without breakouts, 4 flange pockets, 3 mounting holes, 2 alignment holes.

1979 DECKEL Typ KF-3 S

• Manufacturer: Deckel / Maho
• Model: DECKEL KF 3 S

No. 0104: 1 used Universal copy milling machine make DECKEL, type KF-3 S, mod. 1979 with divided coordinate table Work area: 700 x 560 x 450 mm, drive power: 3 kW Accessories: Divided coordinate table (new price ...

2000 DECKEL-MAHO DMC 103 V

• Manufacturer: Deckel / Maho
• Model: DMC 103 V

x-travel 1000 mm y-travel 600 mm z-travel 460 mm Control Sinumerik 810 D total power requirement 9 / 13 kW weight of the machine ca. 7 t dimensions of the machine ca. 3 x 3 x 3 m No. 5381: Vertical machining cen...

2002 DECKEL MAHO DMC 60 S

• Manufacturer: Deckel / Maho
• Model: DMC 60 S

x-travel 760 mm y-travel 460 mm z-travel 560 mm control Sinumerik 840 D PL - Shop total power requirement 19/28 kW weight of the machine ca. 13 t dimensions of the machine ca. 12 Lademeter m Movie: No. 410...

2001 DECKEL-MAHO DMC 103 V

• Manufacturer: Deckel / Maho
• Model: DMC 103 V

x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control Sinumerik 810 D Shopmill total power requirement 13 kW weight of the machine ca. 7 t dimensions of the machine ca. 3 x 5 x 3 m No. 5377 vertical machining...

2007 DECKEL MAHO DMC 64 V linear

• Manufacturer: Deckel / Maho
• Model: DMC 64 V

x-travel 640 mm y-travel 600 mm z-travel 500 mm control Siemens 840 D total power requirement 19 kW weight of the machine ca. 8 t dimensions of the machine ca. 5 x 4 x 3 m No. 5312: Vertical machining center DEC...

2013 Deckel Maho DMU 75

• Manufacturer: Deckel / Maho
• Model: DMG MORI DMU 75

Packing 1600*1900*450 mm Shipping weight ca. 400 kg

1978 DECKEL KF-3 S

• Manufacturer: Deckel / Maho
• Model: DECKEL KF 3 S

x-travel 700 mm y-travel 560 mm z-travel 450 mm total power requirement 3 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 3*3*2 m universal copying milling machine Workspace: 700 x 560 Dr...

1980 DECKEL KF 3 S

• Manufacturer: Deckel / Maho
• Model: DECKEL KF 3 S

x-travel 700 mm y-travel 560 mm z-travel 450 mm total power requirement 3 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 3 x 3 x 2,5 m No. 0105 Universal copy milling machine DECKEL KF 3 S ...

2008 DECKEL MAHO DMU 80 monoBLOCK

• Manufacturer: Deckel / Maho
• Model: DMU 80 MONOBLOCK

x-travel 980 mm y-travel 630 mm z-travel 630 mm Control iTNC 530 total power requirement 10 / 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. 4*4*2,5 m Equipment: Electronic handwheel Operat...

2010 DMG MORI ( DMU 40 )

• Manufacturer: DMG Mori
• Model: DMU 40

liter capacity 63 l tank 250 l Pressure power 1,5 (max. 2,5) bar total power requirement - kW weight of the machine ca. 100 kg dimensions of the machine ca. 1,4*0,6*1 m

2016 HAAS UMC 750 - 5 AX

• Manufacturer: Haas
• Model: UMC-750

x-travel 762 mm y-travel 508 mm z-travel 508 mm Control HAAS Number of working hours 10.000 / 5.000 h swivable table: Ø 630 x 500 swivelable +/- +120/ -35 x 360 ° Interference circuit diameter 680 mm internal co...