Used Machine Tools in Washington, USA

Trusted Seller
Auction
Lincoln Welder with Cart
- Manufacturer: Lincoln
Working condition is unknown. Welder is a 220V and comes with a tank, helmet, and cart.
Ridgefield, WA
Visit Auction Website
Trusted Seller
Oliver bandsaw circle cutting built-in turn-table
5HP motor TEST VIDEO IN WITH THE PHOTOS Contact us for a price or additional photos/ video
Toledo, WA
Trusted Seller
L &M verticut 2000 saw bars,
- Manufacturer: Baxter Verticut
L &M verticut 2000 saw bars, LM unit saw bars Overall length 68”+- 5 bars available Used Saw chains available Contact us for a delivered price
Toledo, WA
Trusted Seller
Sweed scrap chopper, 510AK, banding chopper
- Manufacturer: Sweed
Serial # 30932 120 volts 1-1/2 HP Video of chopper operating Contact us for pricing and a freight rate.
Toledo, WA
Trusted Seller
6 ft Blue Babe deck saw bars
72”+- overall length 3 bars available 5 Oregon chains available Contact us for a delivered price
Toledo, WA
2018 FLOW MACH 500
- Manufacturer: Flow
- Model: MACH 500
*Stock Photo* Machine was disassembled X axis travel: 78" | Y axis travel: 157" | Z axis travel: 12" | Air supply: 100 PSI | Water pressure: 94,000 PSI | Pump power: 50 HP | Weight: 42,374 | Hours: 5800
$167,000 USD
Get financing
Est. $3,143/mo
Washington, USA
Sciaky / Janda Circumferential Seam Welder 12”x 60”
- Manufacturer: Janda
Janda Circumferential Seam Welder 12”x 60” throat, 250 Kva
Seattle, WA
Trusted Seller
Auction
Car Parts and Tools
There are a few blocks, an engine stand, dies, corded tools, hardware bins and more. Shipping is not available for this lot.
Ridgefield, WA
Visit Auction Website
Trusted Seller
Auction
Work Bench with Parts and Tools
There is a large vise mounted to the wooden work bench. There are several magnetos, gaskets, large taps, pistons, drill bits and more included. The items that are on the shelves above the bench are also included....
Ridgefield, WA
Visit Auction Website
2011 AIM AFC6
- Manufacturer: AIM
Set up time: P270-5 Payoff Unit Specifications Controls: Rotation selector E-Stop Momentary reverse button Utility Requirements 480 VAC, 3 Phase 50/60 Hz, < 1 CFM air supply. AIM P270-5 Payoff Unit
$66,000 USD
Get financing
Est. $1,242/mo
Washington, USA
2024 AIRCO 500
- Manufacturer: Airco
Additive mode xyz travel: 13.78x13.78x19.69 inches | Subtractive mode xyz travel: 19.69x13.78x19.69 inches | Table size xy: 23.62x11.81 inches | Table: 6.69 inches | Maximum workpiece size ø, h: 4.72x11.81 inche...
$184,000 USD
Get financing
Est. $3,463/mo
Washington, USA
2007 AMADA FO3015NT
- Manufacturer: Amada
- Model: FO-3015NT
Material Capacities: FootprintL 385" x 107" X axis travel: 122.8" | Y axis travel: 61" | Z axis travel: 7.87" | Max cutting size: 5' x 10' (61" x 122.8") | Rated power: 4000 WATTS | Max rapid traverse: 3150IPM | ...
$29,000 USD
Get financing
Est. $546/mo
Washington, USA
2010 GERBER SABRE 408
- Manufacturer: Gerber
- Model: SABRE 408
Dust Collector Vacuum System Hold Down X axis travel: 102" | Y axis travel: 54" | Z axis travel: 8" | Table size: 53 1/2” x 101” | Spindle speed: 24,000RPM | Spindle motor: 7hp | Dimensions: 68” 123” | Weight: 15...
$12,540 USD
Get financing
Est. $246/mo
Washington, USA
Trusted Seller
Auction
(6) Hit and Miss Engine Mufflers
Three mufflers are Maytag branded. One is missing the cover. The large Maytags measure 4 3/8” wide and the small ones measure 3” wide.
Ridgefield, WA
Visit Auction Website
Trusted Seller
Auction
Engines and Mill
Both engines are free and appear to be mostly complete. The mill was made by Mitchell Lewis and Starver and is a number 7 model D. The hopper has been removed but is included.
Ridgefield, WA
Visit Auction Website
Matsuura H.Plus 300 Machining Center
- Manufacturer: Matsuura
- Model: H.Plus 300
Good condition Matsuura H.Plus 300 Machining Centers available between 2001 and 2007 years. Located in USA and other countries. Click request price for more information.
USA