Used Machine Tools in Hesse, Germany

Werkzeugaufahme 50 x SK 50 / ISO 50

• Manufacturer: Werkzeugaufahme 50 x

tool clamping area ? mm weight ? t Control type: conventional

BOLEY d101.04 / d103.02

• Manufacturer: BOLEY

tool clamping area ? mm weight ? t Control type: conventional

DECKEL 2314

• Manufacturer: Deckel / Maho

table length 1000 mm table width 520 mm table load 1 / 1,5 t surface area 1000 x 520 mm no. of flutes 6 groove width 16 mm weight of the machine ca. 400 t dimensions of the machine ca. 1,2*0,8*0,8 m Turning, swiv...

1990 MIKRON / Kunzmann 20.75 WF 71-72 / AROUND 900 / WF 9

• Manufacturer: Kunzmann

surface area 1200 x 600 ( x 500 ) mm no. of flutes 9 groove width 14 / Abstand 63 mm total power requirement 0 kW weight of the machine ca. 500 kg Packing Holzkiste 1400*850*700 mm

1996 COSTELLI / RAMBAUDI Rammatic / SK 50

• Manufacturer: Rambaudi

tool magazin: 30 Stationen Shipping weight ? kg Packing ? mm

1995 SANDVIK COROMANT Capto C5 - 25 pcs.

• Manufacturer: Sandvik
• Model: Capto

tool clamping area - mm Shipping weight 22 kg Packing ? mm

DECKEL 2215

• Manufacturer: Deckel / Maho
• Model: 2215

type -- mm tool adaptor - weight - kg centre height -- mm total power requirement - kW weight of the machine ca. - t dimensions of the machine ca. - m

1986 EMAG / GACK NC / INDRAMAT

• Manufacturer: Indramat

power capacity - kW tool adaptor - total power requirement - kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,6 * 0,5 * 0,9 m

1986 EMAG / GACK NC / Indramat

• Manufacturer: Indramat

power capacity - kW tool adaptor - total power requirement - kW weight of the machine ca. 380 kg dimensions of the machine ca. 1,6 * 0,6 * 0,9 m

SK 30

tool adaptor Ø 105 158 mm Packing 240*190 m Shipping weight 11 kg

Radius Apparat R 25

• Manufacturer: Radius Apparat

tool clamping area Multifix B ( C ) mm weight 15 kg Packing Holzkiste 325 x 175 x 210 mm

1986 EMAG / GACK NC / KOMET PKB 200-20-112

• Manufacturer: Komet

power capacity - kW tool adaptor KOMET PKB 200-20-112 total power requirement - kW weight of the machine ca. 700 kg dimensions of the machine ca. 1,6 * 0,7 * 1 m

DECKEL 2224-0153

• Manufacturer: Deckel / Maho

milling tool taper Morse 1 collets Typ DECKEL 6044 / Morse-1 weight ca. 50 kg dia. of draw-in collets 0,5 - 6,5 mm

EPPINGER / WTO / COROMANT OKUMA

• Manufacturer: Eppinger

tool taper VDI shaft cross cut 40 tool taper Okuma ratio ? turning speeds ? U/min ? coolant ? Set of tool holders VDI 40 with drive ( 8 pieces ) suitable e.g. for OKUMA box dimensions approx. 500 x 300 x 200 ...

1992 SEW - Eurodrive KF-46 DT80N-4 BM

• Manufacturer: SEW-Eurodrive

power capacity 0,75 kW volt 380 V ampere - A total power requirement 0,75 kW weight of the machine ca. ? t dimensions of the machine ca. ? m Brake motor with angular gearbox Speeds 1/2 : 1380/84 /min