Used Machine Tools in Gunma, Japan

1997 Kitai Sangyo 8-FN
- Manufacturer: 北井産業
Cutting module 0.2-2.0 Cutting diameter 3-160 If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
Hamai Sangyo 40
- Manufacturer: Hamai
- Model: 40
Cutting gear: Spur gear Max. cutting diameter 30 Max. cutting length 30 Max. installation length 50 Max. cutting Module 1.0m Number of cutting teeth 6-260(390)z If there is any discrepancy between the contents an...
Tatebayashi, Japan
2001 Tiger Giken VPD208M
- Manufacturer: Giken
2t Stroke 800 If there is any discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
1992 LUXO SE-400(L-400)
- Manufacturer: Laxou
Three-phase 200 V, table dimensions 600 x 600 mm, with feeder If there is any discrepancy between the contents and the actual product, the actual product will take precedence.
$2,896 USD
Tatebayashi, Japan
1986 NCC NCC-400
- Manufacturer: NCC
3-phase 200V 50/60Hz Table size 550 x 700mm Weight 630kg If there is any discrepancy between the contents and the actual product, the actual product will take priority.
$2,253 USD
Tatebayashi, Japan
1983 ncc ncc-500
- Manufacturer: NCC
In case of any discrepancy between the content and the actual product, the actual product will take precedence.
Tatebayashi, Japan
1980 Amada VA-500
- Manufacturer: Amada
- Model: VA-500
Three-phase 200V 50/60Hz Table size 740 x 700mm If there is a discrepancy between the contents and the actual product, the actual product will take precedence.
$2,896 USD
Tatebayashi, Japan
LUXO L-1000
- Manufacturer: LUXO
Three-phase 200V Rotation speed 30-400m/min Table dimensions 600 x 700mm The photo shows the product in an uncleaned condition. If there is a discrepancy between the contents and the actual product, the actual pr...
$6,436 USD
Get financing
Est. $126/mo
Tatebayashi, Japan
2014 Nikotech NCC-400L
- Manufacturer: Nicotech
3 phase 200V 50/60Hz Table size 700 x 700mm Weight 350kg The photos show the table in an uncleaned condition. If there is any discrepancy between the contents and the actual product, the actual product will be gi...
$5,149 USD
Get financing
Est. $101/mo
Tatebayashi, Japan
AND SAW TA-400L
- Manufacturer: Ando
- Model: TA-400L
Cutting capacity: Max. thickness 310 mm, depth 400 mm, Table dimensions: 750 x 700 mm, with table/guide frame feed 3-phase 200 V, single-phase 100 V use If there is any discrepancy between the contents and the ac...
$3,218 USD
Tatebayashi, Japan
1996 NCC NCC-300
- Manufacturer: NCC
Three-phase 200V Single-phase 100V 50/60Hz Table 500mm square Weight 250kg If there is a discrepancy between the contents and the actual product, the actual product will take precedence.
$1,287 USD
Tatebayashi, Japan
1983 Komatsu SHG-3C-220
- Manufacturer: Komatsu
Maximum board thickness 3.2mm Corner notch 220 x 220 In case of any discrepancy between the content and the actual product, the actual product will be given priority.
Tatebayashi, Japan
2007 Wasino LEO-80A
- Manufacturer: Amada - Wasino
- Model: LEO-80A
12-inch 3-jaw scroll chuck (Kitagawa/JN12RA6) Spindle through-hole diameter 54 Center distance 800, Bed swing 490, Carriage swing 260, Spindle speed 23-1800 rpm, 2-axis digital scale, Coolant included.
Tatebayashi, Japan
Okuma LT
- Manufacturer: Okuma
- Model: LT
If there is a difference between the content and the actual item, the actual item will be given priority.
Tatebayashi, Japan
artículo
- Manufacturer: Amada - Wasino
- Model: LEOG-80A
12-inch 3-jaw scroll chuck, spindle through hole diameter 54, center distance 1000, spindle speed 23-1800 rpm, swing above bed 490, swing above carriage 260, with cut-off, with 2-axis digital scale.
Tatebayashi, Japan