Used Lathes in Saxony, Germany

FORKARDT lathe chuck

3-jaw chucks, three-jaw chucks, power chucks, wedge bar chucks FORKARDT F 160 with 3 additional interchangeable jaw sets ! used, tested !

PAGUS lathe chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck PAGUS Was used on a Toyoda HES52 with many accessories ! used, checked !

WMW lathe chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRFA/-200x3 ) TGL 34-185 Jaws individually adjustable by toothing ! New !

WMW lathe chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW used, tested !

BIAL lathe chuck

3-jaw chucks, three-jaw chucks, power chucks BIAL, BISON 2404-250 max. 3000 rpm Jaws individually adjustable by toothing ! New !

PAGUS lathe chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck PAGUS Outer Ø: 200 mm

WMW lathe chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH-B 200x3x6 ( DH-B200x3x6 ) TGL 30-2332 used, tested !

PAGUS lathe chuck

• Manufacturer: Pagus

3-Jaw Chuck, Three-Jaw Chuck with External Jaws PAGUS Short Taper with 3 Additional External Jaws with Wrench Used, Tested!

WMW lathe chuck

• Manufacturer: WMW

4-jaw chuck, four-jaw chuck WMW, ROTO RECORD with second set of jaws ! used, tested !

FORKARDT lathe chuck

3-jaw chucks, three-jaw chucks, power chucks, wedge bar chucks FORKARDT F 160 with 2 additional interchangeable jaw sets and one basic jaw set ! used, tested !

WMW lathe chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRFB/8-250x3 ) Jaws individually adjustable by toothing ! used, tested !

PAGUS lathe chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck PAGUS with second set of jaws ! used, tested !

WMW lathe chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH475x3-III TGL 30 2332 max. 800 rpm used, tested !

ROTO RECORD lathe chuck

4-jaw chuck, four-jaw chuck with individually and centrally adjustable jaws ROTO RECORD DHk 315 x 4 20 - 240 mm 75 - 240 mm with key New, preserved!

WMW NILES lathe chuck

• Manufacturer: Niles

3-Jaw Chuck WMW NILES DHK 200x3 Mint Condition! Outside ø: 200 mm | Flange: 155 mm | Bore ø: 60 mm | Hole circle: 175 mm | Height with jaws: 125 mm | Feed number: 507 | Dimensions: 200 x 200 x 125 mm