Used Filter Presses

Used JWI/US Filter Model 1000G50-/16/32-20-40SN

• Manufacturer: JWI

Used JWI/US Filter Model 1000G50-/16/32-20-40SN. 40 cu ft Poly plate and frame press. 32 Gasketed Poly plates are 1000 X 1000 mm . Center feed with 4 corner discharge. Has air over hydraulics closing system. Equi...

Stainless Steel 316 Pressure Leaf Filter - IPP# 241128

• Manufacturer: Sparkler

pressure filter

Stainless Steel 316 Pressure Leaf Filter - IPP# 94605

• Manufacturer: Artisan

Filtration resistance due to cake build-up on stationary filter plates is limited to specific controlled thickness by the wiping action of the blades attached to rotating discs in each stage 12-stages, 24-rotatin...

Pressure Leaf Filter Stainless Steel 304 - IPP# 204104

70 ltr pressure filter Centrifugal discharge packing gland on shaft Motor: 220/480 V

Pressure Leaf Filter Stainless Steel 316 - IPP# 220995

Plate pack for a pressure filter Plates stamped # 2229. Seven plates plus a scavenger. With holders and rods.

Cartridge And Candle Filter Stainless Steel Austenitic - IPP# 222986

• Manufacturer: Pall

Pall filter pressure rated 10 bar @ -10/+140 degrees C (7) candles,

Stainless Steel 304 Pressure Leaf Filter - IPP# 220169

Cake Discharge: Dry, suitable for direct or pre-coat filtration Number of Filter Screens: 22 445 gallon 20 HP 3/60/230/460 volt Additional Features: Includes a spare filter plate pack.

Hastelloy - C22 Rosenmund and Cogiem Filter - IPP# 230453

• Manufacturer: Rosenmund

Agitated Pressure Filter The 24.5 Liter vessel is rated -1/6 Bar @ -20 to 200 degree C The 2.7 Liter jacket is rated -1/6 Bar @ -20 to 200 degree C. The .3 Liter Heated Base is rated -1/6 Bar @ -20 to 200 degree ...

Tower Filter 32 m² (344.4 ft²) Plastic - IPP# 204422

• Manufacturer: Larox/Hoesch

polypropylene tower filter press Manufactured by Larox/Hoesch Order no. #610933/34 20 polypropylen and rubber membrane plates 1/1,25 m³ cake capacity max cake thickness 35 mm CS and FRP coated frame., Rubber line...

Stainless Steel 316 Cartridge And Candle Filter - IPP# 230511

• Manufacturer: Pall Portsmouth

Removable top with swing bolts with hand wheels. Removable flat bottom with swing bolts and hand wheels. (2) inlet and outlet.

Cartridge And Candle Filter Stainless Steel 316 - IPP# 230507

• Manufacturer: Cuno

Rated FV/100 PSIG @ -20 to 300 dgrees F Certified by Stainless Fluid Products

Tower Filter 2.4 m² (26 ft²) Titanium - IPP# 70291

• Manufacturer: International Process Plants

complete modular pilot size tower press system installed in a shipping container for portability The tower press capable of filtering suspension having 10-500 Kg/cu meter (.65-31.5 lbs/cu ft) of solids content. C...

Stainless Steel Austenitic Wollner & Platz Nutsche Filter - IPP# 217623

• Manufacturer: Wollner & Platz

Internal 185 litre Jacket 48 litre stainless steel jacket on straight side and bottom dish filter plate with manual raise/lower mechanism TUV certified

2015 Evoqua Water Technologies 1500N32-76-150SYLC

• Manufacturer: Evoqua Water Technologies

Evoqua Water Technologies (now part of Xylem) 1500 mm J-Press. Model #1500N32-76-150SYLC. Filter area 3075 sq ft. 76 plates. Cake thickness 32 mm, Capacity 150 cu ft. Low Operating Hours. Less than 60 days in op...

Stainless Steel 316 JENS OLSEN Nutsche Filter - IPP# 706724

• Manufacturer: JENS OLSEN

2376 liter stainless steel agitated, jacketed tumbling pressure Nutsche filter internal pressure -1/2 bar @ 50/134 degrees C, jacket -1/2 bar @ 50/134 degrees C (150 liter) nged bolt dished bottom with hydraulic ...