Used Extruders

DAVIS STANDARD 75mm 32:1 L/D 18831

• Manufacturer: Davis-Standard

One (1) Used Davis Standard 75mm (2.95″) 32:1 L/D Model DSPW 75IN25 single screw extruder. S/N 72635. SO 80076. Barrel is six (6) zone electrically heated, water cooled(closed loop), and non-vented barrel at a 48...

KILLION / WAYNE 1″ LAB 18656

One (1) used laboratory sheet line consisting of the following:Killion model KL-100 1″ 24:1 extruder. S/N 12809. Unit has a three (3) zone electrically heated, air cooled, top vented, and plugged barrel at a 42″ ...

A&G EXTRUSION 30MM 3 HP 18677

• Manufacturer: A&G Mercury

One (1) used A & G Extrusion Model CE-30 30mm pedestal extruder. S/N 1380. Having a 20:1 L/D ratio. Unit has an electrically heated and non-vented barrel. Single blower on last zone of the barrel. Benzlers gearbo...

AMERICAN KUHNE 100mm 30:1 L/D 18185

• Manufacturer: Kuhne

One (1) used American Kuhne 100mm (3.94″) 30:1 L/D extruder. S/N 6882. Has (7) zone electrically heated, air cooled, and non-vented barrel at an approximate 42″ center line height. Gearbox is a Koellmann model Un...

NRM / DAVIS STANDARD 1.5″ 16125

• Manufacturer: Davis-Standard

NRM / Davis Standard 1.5″ Pacemaker IV extruder, S/N 19218, S/O 52660. 24:1 L/D air cooled electrically heated barrel with a 42″ to 44-3/4″ adjustable centerline. Driven by a 10 HP 1750/2300 RPM DC motor with Rel...

DAVIS STANDARD 3.5″ DOUBLE SPIRAL 12398

• Manufacturer: Davis-Standard

Davis Standard 3.5″ double spiral screw 32:1 L/D, 136″ overall length 12″ shank.Three are available.

DAVIS STANDARD 3.5″ 30:1 L/D 16399

• Manufacturer: Davis-Standard

Used Davis Standard model MV35IN35SR, 3.5″ extruder, S/N K2187, SO# 99878. 30:1 L/D barrel having a seven zone electrically heated and water cooled (closed loop) and side vented barrel at a 52″ centerline height....

6″ Davis Standard 60IN60TPIH 30:1 500 HP VENTED EXTRUDER

• Manufacturer: Davis-Standard

DAVIS STANDARD 4.5″ 30:1 L/D 18937

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 45IN45 extruder. S/N M3316. Shop order 05432. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and non-vented barrel at a 42″ center-line. Gearbox...

DAVIS STANDARD 4.5″ 30:1 L/D 18936

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 45IN45 extruder. S/N M3315. Shop order 05432. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and non-vented barrel at a 42″ center-line. Gearbox...

DAVIS STANDARD 130mm 32:1 L/D 18933

• Manufacturer: Davis-Standard

One (1) used Davis Standard 130 mm (5.1″) model 130IN45HT extruder. S/N 14844. Shop order 70693. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ c...

GLOUCESTER 2522 2.5″ 32:1 L/D 17805

One (1) Used Gloucester model 2522 R2 2.5″ 32:1 L/D extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72″ center line height. Gearbox has a reduction ra...

EGAN 3.5″ 32:1 L/D 150 17807

• Manufacturer: Egan

One (1) used 3.5″ 32:1 L/D Egan extruder having an electrically heated, water cooled (closed loop), top vented, and plugged barrel at an approximate 52″ center line height. Philadelphia gearbox has a reduction ra...

WELEX 6″ 36:1 L/D 500 18830

• Manufacturer: Welex

One (1) used Welex model 6.0 36D 6″ 36:1 L/D extruder. S/N 6492. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate 66″ center line height. Koellman model Unex 8.13 gea...

GLOUCESTER 4.5″ 30:1 250 HP 18227

One (1) used Gloucester model 244-001 4.5″ 30:1 L/D extruder having an electrically heated, air cooled, and non-vented barrel at an approximate 56″ center line height. Cool Touch heaters with integral blowers wer...