Used Extruders

CONAIR 18010902

• Manufacturer: Conair

Used Conair hot air Dryer. Model 18010902, serial #137284. No hopper included.

JOHNSON

• Manufacturer: Johnson

Used Johnson roll pull roll stand Has (2) 54" x 8" diameter rubber covered rolls Rolls are driven by 10 hp DC motor Drive-All 4-speed gearbox Air actuated top pull roll

24" x 12"

Used 24" Wide 3-Roll Down-Stack Cooling Roll Stack (3) 12" diameter rolls Approximately 5' cooling conveyor Rbber to metal pull roll assembly Chill rolls driven by a 5HP DC motor without drive Pull rolls are driv...

MATSUII DMZ-120

• Manufacturer: MATSUII

Used Matsui dehumidifying dryer. Model DMZ-120, Serial #01464, new 1995. Rated at 120 CFM. Has 3 KW heater, 230 volt, 3 phase, 60 hertz. Includes hopper mounted on a portable stand.

RANDCASTLE Ø51 мм × 203 мм

• Manufacturer: RANDCASTLE

Used 2" O.D. x 8" Wide Randcastle Sheet Extrusion 3-Roll Stack including Pull Roll Station and Single Position Winder.

BUSS 200 HP

• Manufacturer: Buss

Used 100mm Buss kneader with 9/1 L/D barrel. Driven by 200 hp DC motor, includes 5.94/1 gearbox, jacketed barrel and clam shell barrel opening. Includes operator control panel. Kneader will discharge into approxi...

2003 WERNER & PFLEIDERER ZSK20

• Manufacturer: WP
• Model: ZSK20

Used 20mm Werner & Pfleiderer model ZSK20 co-rotating twin screw extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft. Extrude...

2008 COPERION ZSK-40-MEGA

• Manufacturer: Coperion Waeschle

Used 40mm Coperion Mega 40 co-rotating twin screw extruder. New 2008. No barrels or screws included. Driven by 200 hp AC motor, 1790 rpm, with Powerflight VFD controller. Has 1.155 gear ratio supplying 1200 rpm s...

2014 STEER OMICRON 12P

• Manufacturer: STEER

Used 12mm 45/1 L/D Steer Engineering co-rotating twin screw extruder with chrome plated steel screws and barrel. Model Omicron 12P, serial #EA00427, new 2014. Driven by a 2 HP, 480 volt/3/60 motor. Includes contr...

BATTENFELD CINCINNATI CM55

• Manufacturer: Battenfeld-Cincinnati

Used Battenfeld-Cincinnati model CM55 counter rotating approximately 55mm diameter twin screw extruder. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with 0.20...

Cincinnati CMT80L-APC

• Manufacturer: Cincinnati
• Model: CMT

Used Cincinnati model CMT80L-APC conical counter rotating twin screw plastic extruder. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adaptor plate that reduces the barrel exit down...

Gloucester 4.5"

• Manufacturer: Gloucester

Used 4.5" Gloucester hydraulic screen changer with strand die and hydraulic pumping system. Strand die has thirteen (13) 1/8" diameter holes.