Used Extruders

Imperia & Monferrina P6 Automatic Fresh Pasta Extruder – 12 kg/hour Production

• Manufacturer: Imperia & Monferrina

53859001 Used Imperia & Monferrina Automatic Fresh Pasta Extruder, Model P6. 12 kg/hour pasta production; 6 kg capacity kneading vat; 89 mm die diameter; Automatic cutter with speed controls. Includes Multipasta ...

3.5″ Polytruder 24:1 Air Cooled Extruder

Gloucester 2522 R2 2.5" Extruder – 60 HP, 32:1 L/D, Reconditioned

• Manufacturer: GloucesterGloucester

10755143 Used Gloucester Model 2522 R2 2.5" 32:1 L/D Extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72" centerline height. Gearbox has a reduction ra...

4.5″ Davis Standard Extruder MV45IN45 1997

• Manufacturer: Davis-Standard

4.5″ Davis Std. Extruder MV45IN45 – New 1998 Water Cooled 24:1 N-Vented

3.5″ Davis Std. 30:1 Air Cooled Extruder

• Manufacturer: Davis-Standard

3 1/2” Davis Standard 30:1 150 H.P. A.C. Air Cooled 350 to 400 # per HR. Material Poly No Clamp Bolt on Front End 17:1 Gear Ratio 100 RPM 5 Barrel Zones 4 Die Zones

2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned

2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned 42″ Centerline – 36:1 L/D Ratio – 6″ x 3.5″ feed throat, Belt Driven through a 13.95:1 Koellman PEZS 360/3.5 Gearbox, Rated to 125 HP, 75 HP Baldor DC Motor with R...

Pre-Owned Killion KL-075 Single Screw Extruder – Electrically Heated, Air-Cooled

• Manufacturer: KillionKillion

54037006 Used Killion KL-075 Single Screw Extruder. 19.1 mm Diameter screws. 25:1 L/D. Screw speed 12-120 RPM via a gearbox by a 1.1 kW-380 volt/50cycle/3Ph DC motor. 3 housing sections. Electrically heated, air ...

20mm Werner & Pfleiderer Model ZSK20 Co-Rotating Twin Screw Extruder

• Manufacturer: WP
• Model: ZSK20

10151389 Used 20mm Werner & Pfleiderer Model ZSK20 Co-Rotating Twin Screw Extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft...

6″ NRM PM III -30:1 VENTED – AIR COOLED EXTRUDER

• Manufacturer: NRM

6″ NRM PM III -30:1 VENTED – AIR COOLED EXTRUDER REBUILT – approximately 43″ centerline height, gearbox having new bearings and seals with cooling system – new heat exhanger and pump, 30:1 L/D 8 zone barrel, cast...

Werner & Pfleiderer UK2000AEL Sigma Mixer/Extruder – 316 SS, 793 Gallon Capacity

• Manufacturer: WP

10131017 Used Werner & Pfleiderer Mixer/Extruder, Type UK2000AEL. 316 Stainless steel construction. Total capacity 793 gallon (3000 liter); working capacity 530 gallon (2000 liter). Bowl 56.6" x 65.5" x 54.6" dee...

Werner & Pfleiderer ZSK40 Twin Screw Extruder for Sale – 40mm, 50 HP

• Manufacturer: WP
• Model: ZSK40

10151368 Used Werner & Pfleiderer Model ZSK40, 40mm Co-rotating twin screw extruder. 1990 Model year. 46:1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/2100...

Coperian ZSK-18 ML Twin Scrw Extruders New 2008 (3 available)

Coperian ZSK-18 ML Twin Scrw Extruders New 2008 (3 available) Screw Diameter: 18 mm/twin screw 15 HP Centerline – 1100mm/43.3″ Water Cooled 460 volt

3.5″ Davis Std. 24:1 Extruder Model 35IN35

• Manufacturer: Davis-Standard

3.5″ Davis Std. 24:1 Extruder – Model 35IN35 – New in 1995 – but Refurbished since and not been used since … 50 HP AC motor and Drive Air Cooled 5 Barrel Zones – 3 Die Zones

Welex 3.5" 30:1 L/D Extruder – 150 HP, Vented Barrel, Melt Pump & Screen Changer

• Manufacturer: Welex

10755146 Used Welex 3.5" 30:1 L/D Extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69" center line height. Center line height can be reduced approximately 8" by removin...