Used Extruders

Trusted Seller
CREUSOT LOIRE BC-45
- Manufacturer: Loire
Used Creusot Loire (Clextral) model BC-45 twin screw extruder. Machine #750, Serial #5100750. 2 zones, 55 mm diameter screws. 45mm between shaft centers. Includes central console, pneumatic knife, powder feeder, ...
Hainesport, NJ
Trusted Seller
DAVIS STANDARD 150INDS-20
- Manufacturer: Davis-Standard
Used 1.5” Davis Standard Vented Single-Screw Extruder Model: 150IN DS-20 Driven by a nontagged motor and a Reliance model GV3000 AC drive Gearbox: 6.53:1 ratio, rated for 50 hp, 1.25 service factor, 152 rpm screw...
Hainesport, NJ
Trusted Seller
1994 HPM 3.5TMC-24
- Manufacturer: HPM
Used 3.5" 24/1 L/D HPM non-vented extruder. Model 3.5TMC-24, serial #93182. New 1994. Has electrically heated, air-cooled, barrel. Belt driven by a 75 hp brushless DC motor with controls. Flender gearbox type SZN...
Hainesport, NJ
Trusted Seller
1991 DAVIS STANDARD 4.5"
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M-3315, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-1...
Hainesport, NJ
Trusted Seller
2000 DAVIS STANDARD 5.11"
- Manufacturer: Davis-Standard
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continu...
Hainesport, NJ
Trusted Seller
1997 DAVIS STANDARD 5.11"
- Manufacturer: Davis-Standard
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continu...
Hainesport, NJ
Trusted Seller
BATTENFELD GLOUCESTER 54" Wide
- Manufacturer: Battenfeld
Used 54" Wide Battenfeld Gloucester Co-Extrusion Sheet Extrusion Line, previously used for approximately 1200 lbs. per hour polypropylene sheet. Line consists of the following: (3) Acrison volumetric feeders with...
Hainesport, NJ
Aaron Process 300 Gallon Sigma Blade Mixer Extruder. 450 Gallon Total Capacity. Carbon Steel Construction. Serial Number 93300150464MX.
- Manufacturer: Sigma
54118001 Used - Aaron Process 300 Gallon Sigma Blade Mixer Extruder. 450 Gallon Total Capacity. Carbon Steel Construction. Serial Number 93300150464MX. Tangential Sigma Blades. Bowl is approximately, 54" front to...
Belvidere, IL
Theysohn 45mm Co-Rotating Twin Screw Extruder TSK-N 045 – 500 RPM, 50 HP Gearbox, Side Feeder
- Manufacturer: TheysohnTheysohn
53958001 Used Theysohn 45mm Co-Rotating Twin Screw Extruder, Type TSK-N 045. 45mm (1.77") diameter; 36:1 L/D; 8 housing sections and 1 die zone; electrically heated, water cooled. Max screw speed 500 RPM via a 50...
Belvidere, IL
High-Capacity Prealpina Single Screw Extruder – 1100 lbs/hr Production Rate
- Manufacturer: Prealpina
53309001 Used Prealpina 130 mm Diameter Single Screw Extruder, with a capacity of 1100 LBS/500 Kgs./hr. Electrically heated, air cooled. incl. die head and control panel. Reported to have new screw and barrel. Pr...
Belvidere, IL
60mm American Maplan Single Screw Extruder
- Manufacturer: Maplan
60mm American Maplan Single Screw Extruder 25:1 L/D 40 HP Siemens Motir Includes Screw Baumuller b maxx 4000 drive Nord Gear Box 15.56 gear ratio
Rockville Centre, NY
Leistritz Micro18-GGL Twin Screw Pelletizing Line – Industrial Polymer Extruder
- Manufacturer: Leistritz
40425043 Used Leistritz Twin Screw Pelletizing Line, Model Micro18-GGL. 18 mm Screws, counter rotating screws, 40:1 1/d, 500 rpm screw speed, electrically heated, water cooled barrel, 2.3 kw, 210/260 volt, 2950 r...
Belvidere, IL
Trusted Seller
1994 1994 Berstorff 125 HP 6 Meter x180MM Twin Screw Extruder Reactor
1994 Berstorff N/A 125 HP 6 Meter x 180mm Twin Screw Extruder Reactor Consists of: 30,000 Flender process speed reducer Screws Barrel Die Outlet flange 2 heating zones 2 cooling zones 4 circulation pumps Shaft eq...
$675,000 USD
Tuscaloosa, AL
Trusted Seller
RANDCASTLE Ø19 мм, L/D 24:1
- Manufacturer: RANDCASTLE
Used Randcastle Laboratory Sheet Extrusion Line Consiting of the Following Items: - .75" Randcastle 24/1 L/D extruder with temperature control panel, model RCP0750, serial #J2271. - 2" O.D. x 8" wide chill roll s...
Hainesport, NJ
Winkworth ZX500-6 Z-Blade Mixer-Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units
- Manufacturer: WinkworthWinkworth
10151559 Used Winkworth ZX500-6 Z-Blade Mixer/Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units. 500 liter (132Gal) working capacity with a 778 liter total capacity (product dependen...
Belvidere, IL