Used Drilling Rigs

1968 GARDNER DENVER 500 DRILL RIG #10015Ta
- Manufacturer: Gardner Denver
Manufactured 1968, (2) 5 x 6 mud pump, 600 cfm air compressor, 7-1/2” retractable table (rebuilt), 24’ fluted kelly, mounted on 1995 Ford L9000 truck with M11 Cummins engine, 10 speed transmission, PTO, 4 hyd lev...
$162,500 USD
Get financing
Est. $3,058/mo
Oceanside, NY
1990 DIEDRICH D50 DRILL RIG #3452Tb
- Manufacturer: Diedrich
Manufactured 1990’s, auto hammer, 3 winches, 6 cylinder John Deere diesel engine, mounted on 2013 Hino 268 truck, automatic, approx. 200k miles, used for hollow stem auger and mud rotary wells Price: $62,500
$62,500 USD
Get financing
Est. $1,176/mo
Oceanside, NY
INGERSOLL RAND TH100 DRILL RIG PACKAGE #4218T
- Manufacturer: Ingersoll Rand
- Model: TH-100
) Ingersoll Rand TH100 drill rig, 2000’ depth rating, Range III, Cat C15 (475 hp) engine, 60,000 lb pullback, 2 motor spur gear top head, 16” table opening, KB to ground 14.8’ with sub and 4.1’ no sub, 39’ max ca...
$3,650,000 USD
Oceanside, NY
1994 TEXOMA 330-12 DRILL RIG #3961Ta
- Manufacturer: Texoma
- Model: 330
- Drilling depth: 7.62 meter
- Drill Pipe Diameter: 76.19999999999999 millimeter
Manufactured 1994, 12’ depth, Detroit engine, (1) wet bar kelly, 3” square sub, ring and pinion rotary, 3” kelly bar, 5500 lb winch, hydraulic pole grabber that extends 6’, good condition Price: $65,000
$65,000 USD
Get financing
Est. $1,223/mo
Oceanside, NY
1999 INGERSOLL RAND T3 DRILL RIG #11116Tb
- Manufacturer: Ingersoll Rand
Manufactured 1999, 900/350 Doosan air compressor (new 2022), Cat 3406 deck engine (rebuilt May 2022), approx 950 hours on compressor and engine), rotation head completely rebuilt 2024 as well as most hydraulic pu...
$480,000 USD
Get financing
Est. $9,034/mo
Oceanside, NY
2016 DIEDRICH D50 DRILL RIG #242T
- Manufacturer: Diedrich
Manufactured 2016, track mounted, John Deere 4 cylinder turbo (115 hp) diesel engine, 24” wide rubber 2-speed track, tandem hydrostatic drive pump, in/out and side to side slide base, cathead, front carrier winch...
$265,000 USD
Get financing
Est. $4,987/mo
Oceanside, NY
2004 INGERSOLL RAND TH60 DRILL RIG #11116Ta
- Manufacturer: Ingersoll Rand
- Model: TH-60
Manufactured 2004, 1070/350 IR air compressor (new 2021), Cummins engine (rebuilt 2021), new transfer case 2022, mounted on International Paystar tri-drive, set up for 3-1/2” drill rods, located Canada Price: $49...
$495,000 USD
Get financing
Est. $9,316/mo
Oceanside, NY
2007 MAIT HR-30 DRILL RIG #9160T
- Manufacturer: Mait
Manufactured 2007, Komatsu PC65, drill depth approx 70’, stub on locking kelly bar is 100mm Price: $160,000 MAIT HR30/1 MINI DRILL
$160,000 USD
Get financing
Est. $3,011/mo
Oceanside, NY
1978 SCHRAMM T64 DRILL RIG MODIFIED #5882T
- Manufacturer: Schramm
Manufactured 1978, fully refurbished, 900/250 Sullair compressor, Detroit Series 60 diesel deck engine, mounted on 4 axle (3 in rear, one in front) Freightliner truck with Cummins engine, Funk gear box, 42 gpm pu...
$65,000 USD
Get financing
Est. $1,223/mo
Oceanside, NY
Trusted Seller
INGERSOL-RAND ECM370 AIR TRACK DRILL 530029
- Manufacturer: Ingersoll Rand
- Model: ECM-370
- Horsepower: 215 horsepower
IR ECM370 crawler, vertical, hydraulic rock drill, uses T38 steel, VL140 drifter, Cummins 8CT 8.3T 215HP engine, 21/2″-4″ hole. Good undercarriage.
Jefferson City, MO
1983 INGERSOLL RAND TH60 DRILL RIG #10631T
- Manufacturer: Ingersoll Rand
- Model: TH-60
Manufactured 1983, retrofitted with 900/300 air compressor (installed 2019 with approx. 1400 hours), Deutz V12 twin turbo deck engine, mounted on 2002 Forden truck with Cummins engine, 4000 miles, rod box, no car...
Oceanside, NY
Trusted Seller
2010 Gefco / American Augers VR-330 Drill Rig
- Manufacturer: American Augers
Unused!! American Augers Used VR-330 Standard Oil and Gas Drilling Rig 2010 Serial Number VR3300050808 Cat C11 Diesel Engines Safe Working Load Rating: 330,000 lbs (150 Tonnes) 1. Built to API Spec 4F – Spe...
El Reno, OK
1973 SANDERSON CYCLONE 300 DRILL RIG #3476T
- Manufacturer: Sanderson
Manufactured 1973, Mounted on 1999 International 4700 truck with diesel engine, PTO, 110,000 miles, centrifugal pump was removed Price: $65,000
$65,000 USD
Get financing
Est. $1,223/mo
Oceanside, NY
1991 WATSON 3100CM-80 DRILL RIG #2948T
- Manufacturer: Watson
Built 1991, Cummins engine, track mounted, 80’ depth Price: $110,000 WATSON 3100 DRILL RIG
$110,000 USD
Get financing
Est. $2,070/mo
Oceanside, NY
2022 CASAGRANDE B300 DRILL RIG #10185Ta
- Manufacturer: Casagrande
Built 2022, includes 4 x 9.5m kelly bar, H30 rotary head, Tier 4 standards, G&H system installed, FDP and CRA capabilities Price: $1,575,000 CDN
$1,575,000 USD
Oceanside, NY
Atlas-Copco ROC D7-11 Drilling Rig
- Manufacturer: Atlas-Copco
- Model: ROC D7-11
Good condition Atlas-Copco ROC D7-11 Drilling Rigs manufactured in 2010. Located in USA and other countries. Click request price for more information.
USA