Used Drilling Rigs in Marche, Italy

2021 TESCAR CF3 S

• Manufacturer: TESCAR
• Hours: 1,830 hour

Used TESCAR C F3 S Available Compact piling machine Mounted on excavator base CASE CX90D Complete with: - Interlocking KB for 2 2 m - Interlocking KB for 1 2m

TES CAR CF8

• Manufacturer: Tes Car
• Horsepower: 130.07914261784933 horsepower
• Gross weight: 27,000 kilogram

Grab dimension: 2500 x 600 mm | Max depth with kelly bar: 30 m | Max depth with square kelly: 25 m | Engine power: 97 kW | Total weight: 27 t

TES CAR KELLY BARS

• Manufacturer: Tes Car

TES CAR has got more than 30 years experience in the design and manufacturing of whatever type of telescopic kelly bars, locking type, friction type, suitable for whatever type and brand of piling rig. Using the ...

TES CAR CF2.5

• Manufacturer: Tes Car
• Horsepower: 46.935773109533265 horsepower
• Gross weight: 7,500 kilogram

Hydraulic piling rig CF2.5 Equipped with a special mast divided into two telescopic sections to reach the minimum working position of 3500mm. The CF2.5 is equipped with a standard locking kelly bar for a depth of...

2007 TRIVELSONDA TRIVE 80

• Manufacturer: Trive
• Hours: 8,000 hour

Used TRIVELSONDA TRIVE 80 available Drilling rig for piles Complete with: - Interlocking kelly bar 30 m, 4 original el. SIP&T (8 m x 4 elements), kelly stub 130x130 mm - CE Certificate - IVECO engine

TES CAR TT8 CFA

• Manufacturer: Tes Car
• Horsepower: 107.2817671075046 horsepower
• Gross weight: 25,000 kilogram

* with expanding tracks Torque: 80 kNm | Engine power: 80 kW | Max depth: 12 - 16 m | Max diameter: 800 mm | Total weight: 25 t

TES CAR ROTARIES

• Manufacturer: Tes Car

Hydraulic rotaries for piling and micro-piling rigs, oil bath or grease bath, with a torque up 2,5 kNm to 120 kNm.

TES CAR CASING OSCILLATORS

• Manufacturer: Tes Car

Further to the standard rotaries, we manufacture a special rotary for the "cose to the wall" drilling with minum diameter Ø400mm, both on kelly bar and CFA mode. This rotary has got a torque of 60 kNm and can dri...

2005 MAIT HR 45

• Manufacturer: Mait
• Model: HR45
• Horsepower: 136 horsepower
• Drilling depth: 26.0604 meter

Used MAIT HR 45 Available Piling rig Mounted on CATERPILLAR CAT312 excavator base Complete with: - Interlocking kelly bar for 27m

TES CAR CF3 S PLUS

• Manufacturer: Tes Car
• Horsepower: 67.98981990438105 horsepower
• Gross weight: 13,000 kilogram

Hydraulic drilling machine CF3 S PLUS Equipped with a special tower divided into 3 telescopic sections with a counter-slide device to lower the tower unit to the ground and reach the minimum working position of 3...

2007 TESCAR CF6

• Manufacturer: TESCAR
• Hours: 6,800 hour

Used TESCAR CF6 Available Machine for piling Complete with: - Kelly bar for 15 m

2009 TESCAR CF3

• Manufacturer: TESCAR
• Hours: 4,500 hour

Used TESCAR CF3 Available Machine for piles Mounted on excavator base New Holland E70 with rubber pads Complete with: - Interlocking kelly bar of 10m (without flange nor cardanic joint)

TES CAR EXTREME LOW HEADROOM - (under 3000mm / 10 ft)

• Manufacturer: Tes Car

CF1 CF2 CF2.5 COMPACT CF3S PLUS

TES CAR TT5

• Manufacturer: Tes Car

TES CAR CFA AUGERS

• Manufacturer: Tes Car

Continuous flight augers with inner passage from 2" to 6", provided with hexagonal joints and toothed point with cap and chain.