Used Drilling Rigs in Kentucky, USA

2005 INGERSOLL_RAND ECM 370

HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe

1984 INGERSOLL-RAND CM351

• Manufacturer: Ingersoll Rand
• Model: CM-351

HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe

2015 EPIROC FLEXIROC D60

• Manufacturer: Epiroc

DTH Class* Cat C15 Tier 4 Final Diesel Engine * Drill Pipe: 16’ft pipe x 4” x 2-7/8” REG API Thread. Very Good Condition This rig has 9800 engine hours and 6000 impact hours.

2015 ATLAS COPCO FLEXIROC D60

• Manufacturer: Atlas-Copco
• Model: FLEXIROC D60
• Horsepower: 474.72181945070787 horsepower
• Drilling depth: 55.5 meter

DTH Class* Cat C15 Tier 4 Final Diesel Engine * Drill Pipe: 16’ft pipe x 4” x 2-7/8” REG API Thread. Very Good Condition This rig has 9800 engine hours and 6000 impact hours.

GILL BEETLE

DTH Class Drills Holes 4 to 24 in Diameter Able to Drill Holes Vertically, Horizontally, and Every Angle in Between Has a Hydraulic table for up to 9 opening IR-360 DTH Hammer w/ Bits 8.5 and 7.5 IR-350 DTH Hamme...

2020 Sandvik DP1500I

• Manufacturer: Sandvik
• Model: DP1500
• Operating weight: 23,000 kilogram

2,295 total hours & 1,015 percussion hours Cat C13 Tier 4 Diesel Engine Drifter / Rock Drill is a RD1635CF Excellent condition

2008 ATLAS COPCO ECM720

• Manufacturer: Atlas-Copco
• Model: ECM 720
• Horsepower: 384.8733394981728 horsepower
• Drilling depth: 29.5 meter

4.5 – 5.5 Inch Class Montabert HC200A Drifter Cat C11 Engine Set up for 60mm drill steel Only 3570 Total Hours

2008 INGERSOLL-RAND ECM720

• Manufacturer: Ingersoll Rand
• Model: ECM-720
• Horsepower: 385 horsepower
• Drilling depth: 30 meter

4.5 – 5.5 Inch Class Montabert HC200A Drifter Cat C11 Engine Set up for 60mm drill steel Only 3570 Total Hours

2013 MONTABERT MICRO CPA360

• Manufacturer: Montabert

Montabert Micro CPA Package Bobcat Mini Excavator E60 w/ 600 Hours HB980 Hydraulic Breaker w/ 120 Hours Doosan P185WJD-T4i Portable Air Compressor w/ 84 Hours Hydraulic Clamp, E60 Micro CPA Drilling Attachment Th...

1993 INGERSOLL-RAND DML

• Manufacturer: Ingersoll Rand

4.5 – 5.5 Inch Class CAT 3412 Diesel Engine w/ Only 1,500 Hours Since Rebuild Runs 30ft Drill Steel High Pressure Unit w/ On-Board IR HR2 1050 CFM / 350 PSI New Pump Drive and Double Motor Spur Gear Head

2011 FURUKAWA HCR900ES

• Manufacturer: Furukawa
• Model: HCR900ES
• Horsepower: 225.3 horsepower
• Machine weight: 202 kilogram

2.5 – 3.5 Inch Class HD709 Drifter w/ 1545 Percussion Hours CAT 3126 Diesel engine w/ 3118 Hours Extendable boom Single-Lever Drilling Controls Design Versatility Allows for Drilling either Horizontally or Vertic...

1997 INGERSOLL-RAND DMLSP

• Manufacturer: Ingersoll Rand

DTH Class Single Pass Drill Rig – 55’ft – 60’ft Mast Cummins QSK19 Diesel Engine High Pressure – IR HR2.5 – 1050 CFM @ 350 PSI Onboard Air Compressor CAT 330L&S Undercarriage

2003 DRILTECH D55SP

• Manufacturer: Driltech

DTH Class 3508 Cat Engine Single Pass Unit Currently using a 8” DTH Hammer with a 9” Bit Equipped w/ ( 2 ) 6 ½” x 25 ft. Drill Pipe w/ 8” DTH Hammer Dust Collector Mast 73’ Long, U/C 85% – Excellent condition. Un...

2005 ATLAS COPCO ROC D7-LM

• Manufacturer: Atlas-Copco
• Model: ROC D7 LM

3.5 – 4.5 Inch Class Long Mast 20′ FT Steel Cat Engine Unit is still in use. 2005 Atlas Copco ROC D7-11 LF These Photos were taken March 29th, 2016 when the unit had 5798 engine hours & 1494 percussion hours. The...

2001 INGERSOLL-RAND ECM680

• Manufacturer: Ingersoll Rand
• Model: ECM-680
• Horsepower: 260 horsepower
• Drilling depth: 30 meter

HCR-150 DRIFTER CUMMINS 6CTA8.3 AUTO ROD CHANGER BOOM SWING HOSE REEL AUTO DRILLING SYSTEM REAR MIRROR

Tamrock Ranger 800 Drilling Rig

• Manufacturer: Tamrock
• Model: Ranger 800

Good condition Tamrock Ranger 800 Drilling Rigs manufactured in 2018. Located in USA and other countries. Click request price for more information.