Used in Aragon, Spain

Caterpillar G3516B

• Manufacturer: Caterpillar
• Model: G3516B
• Horsepower: 1,455.0089663955312 horsepower
• Power: 1,085 kilowatt

CAT G3516B YOM: 2006 Natural gas Power: 1085Kw Always maintenanced under CATERPILLIAR contract full service. Scope of supply: Complete package Genset Control panels Gas train Silincer Muffler Coolers Oil system

2006 CORREA FP35 UAGA

• Manufacturer: Correa

Nicolás CORREA FP35 UAGA CNC boring mill, second-hand for sale. After reconstruction by our team of experts in used milling machines, it is in our Zaragoza warehouse where it can be seen in operation. Ask us. Whe...

VERTICAL BAND SAW JET VBS-18MW 07072

• Manufacturer: JET
• Model: VBS-18

Ref. 07072 VERTICAL BAND MACHINE SAW MACHINE VBS-18MW For wood cut, ferrous and non-ferrous metals. Main Technical Data Saw wheels diameter 470 mm Maximum cutting height 300 mm Maximum cutting width 460 mm Table ...

CONTROL SCREEN XBT P021010

Telemecanique Schneider Magelis XBT P021010 Display. Used, inspected, and in good condition. Telemecanique XBT P021010 SCHNEIDER MAGELIS control panel. Used, inspected, and in good condition. 24V, 10W Ready to ship.

1996 Juaristi TS 5 MG-20

• Manufacturer: Juaristi
• Model: TS5

Second-hand Juaristi TS 5 MG-20 milling and drilling center for sale. It is still in the original location, ready for immediate delivery. So do not hesitate and contact us. Call the number, write us an email to s...

JENBACHER 620 POWER PLANT

• Manufacturer: Jenbacher
• Model: 620

Available complete plant of Jenbacher 620GS-NL from 2018 of 3044kW with only 19681 hours. All the maintenances have been done by official services an d the engine stopped running at full load. The scope of supp...

CNC CUTTING CENTRE MACO VK-370-AR 07071

• Manufacturer: MACO

Ref 07071 CNC CUTTING CENTER ELECTRONEUMATIC VK-370-AR - FAGOR CNC -For metal profiles cutting, straight cut or degrees to both sides Main Technical Data Cutting wheel diameter Ø 370 mmd Cutting wheel rotation 20...

COLUMN DRILLING MACHINE ERLO TCA-40 06667

• Manufacturer: Erlo
• Model: TCA-40

4, 50013 Zaragoza (Spain) Ref 06667 COLUMN DRILLING MACHINE MACHINE TCA-40 Automatic advance mechanical clutch Main Technical Data Maximum drilling capacity 40 mm Tapping capacity M-42 Morse taper no. 4 4 automat...

WELDING MIG CEM COMPACT 30 06530

• Manufacturer: CEM

Ref. 06530 WIRE WELDING WIRE WELDING COMPACT 30 Separate carriage C-12 Main technical features Electronic control that automatically regulates the wire speed. Built-in spot welding device. (characteristics based ...

WELDING MIG INE MGE 200 INVERTER 06534

• Manufacturer: INE

Ref. 06534 WIRE WELDING WIRE WELDING MGE 200 Inverter MIG/MAG MMA Main technical characteristics Voltage 220 V Single phase (characteristics based on data sheet)

WELDING EQUIPEMENT ELECTRODE CEBORA ROD WELD 407 05830

• Manufacturer: Cebora

WELDING EQUIPEMENT ELECTRODO GAR 400 05371

• Manufacturer: GAR
• Amperage: 0.55 ampere

No. 05371 WELDING machine ELECTRODE Brand GAR Model 400 Welding transformer to the arch (c.a.) Main technical characteristics (characteristics based on technical data sheet)

WELDING EQUIPMENT PRAXAIR MIG COMPACT 380 05415

• Manufacturer: Praxair

NO. 05415 WELDING Machine Brand PRAXAIR Model MIG COMPACT 380 MIG INSTALLATION SYNERGIC Separate carriage A-34 Main technical characteristics Voltage regulated by selectors with 20 positions. Electronically regul...

WELDING EQUIPEMENT THREAD ARGON PRAXAIR EURO-400 06351

• Manufacturer: Praxair

NO. 06351 Wire Welding Machine SYNERGIC EURO-400 With separate carriage with double drive Main technical features Power supply 220 V 54 TO 48 TO 27 A 380 V 31 TO 28 TO 22 A 45% 60% 100% 400 A 350 A 270 A 34 V 32 ...

WELDING EQUIPMENT SAF SAFYARD 500 05595

• Manufacturer: SAF
• Model: SAFYARD 500

No. 05595 THREAD WELDING Machine SAF Brand Model SAFYARD 500 Main technical characteristics 420 A 100% 66.2 / 38.2 A at 100% 26.5 KVA. to 100% (characteristics according to technical data sheet)