Used test and measurement

Agilent/Keysight 04287-60111
- Manufacturer: Agilent - Keysight
The A6 test head receives the stimulus signal from the A3 source board through the RFOUT port and test cable, and applies it to the DUT (device under test). At the same time, the test head sense two signals that ...
Farmingdale, NJ
Agilent/Keysight N4697F (N4697-60100 & N4697-60200)
- Manufacturer: Agilent - Keysight
The N4697F set contains two cables. Each is shorter than the N4697E cable. Use the N4697F cables when a DUT is connected between cable ends. NMD Connectors NMD denotes a connector that has larger than standard co...
Farmingdale, NJ
Agilent/Keysight 81142A
- Manufacturer: Agilent - Keysight
- Model: 81142A
The Agilent 81142A 13 GHz serial Pulse Data Generator provides what is needed to conduct physical layer tests e.g. precision low jitter signals or full control of data streams for stress tests. Its linear delay m...
$33,390 USD
Farmingdale, NJ
Agilent/Keysight 87104B
- Manufacturer: Agilent - Keysight
- Model: 87104B
The Keysight 87104B multiport switch improves insertion loss repeatability and isolation, which is necessary for higher performance test systems. The repeatability and reliability of this switch is vital to ATS m...
$520 USD
Farmingdale, NJ
Agilent/Keysight W281ES
- Manufacturer: Agilent - Keysight
The Keysight W281ES In-line ruggedized 1.0 mm (f) - to- WR-10 waveguide adapter offers a way of interconnecting a ruggedized 1.0 mm connector port to a waveguide device in W-band, 75 GHz to 110 GHz. The waveguide...
Farmingdale, NJ
Agilent/Keysight 87204A
- Manufacturer: Agilent - Keysight
- Model: 87204A
The Agilent 87204A terminated multiport switch provides the life and reliability required for automated test and measurement, signal monitoring and routing applications. Innovative design and careful process cont...
$625 USD
Farmingdale, NJ
Agilent/Keysight 87204C
- Manufacturer: Agilent - Keysight
- Model: 87204C
The Keysight 87204C terminated multiport switch provides the life and reliability required for automated test and measurement, signal monitoring and routing applications. Innovative design and careful process con...
$835 USD
Farmingdale, NJ
Agilent/Keysight 8493Y
- Manufacturer: Agilent - Keysight
The Keysight 8493Y coaxial fixed attenuator provides precise attenuation, flat frequency response, and low SWR over broad frequency range at a low price. The attenuator is available in nominal attenuations of 3 d...
Farmingdale, NJ
Agilent/Keysight 70420A
- Manufacturer: Agilent - Keysight
- Model: 70420A
The Agilent 70420A is an MMS Baseband Phase Noise Test Set Module that contains phase detectors and phase-lock loop circuitry. The Agilent 70420A Phase Noise Test Set is the primary 4-slot component of the Agilen...
$4,148 USD
Farmingdale, NJ
Agilent/Keysight AE6964A
- Manufacturer: Agilent - Keysight
The Keysight AE6964A HSD to 2.92 RPC adapter offers a way of connecting to your automotive MDI interface. HSD is a homogeneous impedance-controlled interconnect system for High-Speed Data (RosenbergerHSD®) applic...
Farmingdale, NJ
Agilent/Keysight X424A
- Manufacturer: Agilent - Keysight
- Model: X424A
The Model 424A Crystal Detectors are designed for use in waveguide systems in the measurement of relative microwave power upwards to 100 mW in the range from 2.6 to 18.0 Gc. Output polarity of the detected signal...
Farmingdale, NJ
Agilent/Keysight 84908M
- Manufacturer: Agilent - Keysight
- Model: 84908M
Keysight offers a family of higher frequency attenuators for your communications and aerospace applications. Combining low insertion loss with long life and excellent repeatability, these attenuators safeguard yo...
$3,413 USD
Farmingdale, NJ
Agilent/Keysight 11664E
- Manufacturer: Agilent - Keysight
- Model: 11664E
The Keysight Agilent HP 11664E Detector is designed to operate with the Keysight Agilent HP 8757, 8756, and 8755 Scalar Analyzers in AC mode only. The 11664E detects the envelope of the 27.8 kHz modulated RF sign...
$730 USD
Farmingdale, NJ
Agilent/Keysight 5086-6489
- Manufacturer: Agilent - Keysight
The Directional Coupler assemblies for channel R and test ports 1 and 2 are replaceable on an exchange basis at a considerable cost saving. The test port assembly includes the RF and DC bias connectors, and is th...
Farmingdale, NJ
Agilent/Keysight 8710-1582
- Manufacturer: Agilent - Keysight
Use a torque wrench to make a final connection. It provides information about the torque wrench recommended for use with the calibration kit. A torque wrench is included in the calibration kit. Using a torque wre...
Farmingdale, NJ