Agilent/Keysight N5532A
- Manufacturer: Agilent - Keysight
- Model: N5532A
The N5532A is intended to be used with the N5530S Measuring Receiver System. It is essentially a power sensor with the power splitter at the input. In use, the sensor module’s two output cables are connected to a...
$4,495 USDFarmingdale, NJ
Agilent/Keysight CX3324A
- Manufacturer: Agilent - Keysight
- Model: 3324A
The CX3324A is a 4-channel model for engineers and researchers who need more than two channels for current waveform measurements. Using a passive probe interface (CX1151A) with a current sensor (CX1101A, CX1102A,...
Farmingdale, NJ
Agilent/Keysight 772D
- Manufacturer: Agilent - Keysight
- Model: 772D
The Keysight 772D is a high-performance, dual-directional coupler designed for broadband swept measurements in the 2 to 18 GHz range. This coupler can be combined with Keysight power sensors and power meters for ...
$1,838 USDFarmingdale, NJ
Agilent/Keysight 8990B
- Manufacturer: Agilent - Keysight
- Model: 8990B
The 8990B peak power analyzer is a high performance RF peak power meter specializing in the measurement and analysis of RF pulses. The 8990B achieves 5 ns rise/fall time (with the N1923A/N1924A wideband power sen...
Agilent/Keysight N5171B
- Manufacturer: Agilent - Keysight
- Model: N5171B
Signal characteristics 9 kHz to 1, 3 or 6 GHz +21 dBm specified power to 3 GHz with electronic attenuator ＜ 900-µs simultaneous switching of frequency and power ＜ -121 dBc/Hz (typ) phase noise at 1 GHz and 20 kHz...
Agilent/Keysight 11730F
- Manufacturer: Agilent - Keysight
- Model: 11730F
The 11730F is a 61 m / 200 ft power sensor cable. The 11730 series power sensor cables are used with the 8480 and E-Series power sensors (except the E9320 family of peak and average sensors).
Farmingdale, NJAgilent/Keysight CX1204A
- Manufacturer: Agilent - Keysight
The CX1204A sensor head provides a pair of extension cables for ammeter + and - terminals of a CX3300 analog channel through a current sensor. One side of the pair of cables is soldered in the sensor head, and th...
Farmingdale, NJAgilent/Keysight CX1201A
- Manufacturer: Agilent - Keysight
The CX1201A Sensor Head can be used with the CX1101A and CX1102A Current Sensors. It provides two SMA connectors for ammeter + and - terminals of a CX3300 analog channel through a current sensor. It is useful whe...
Farmingdale, NJAgilent/Keysight CX1202A
- Manufacturer: Agilent - Keysight
The Keysight CX1202A sensor head works with the CX1101A and CX1102A current sensors. It provides two SMA connectors for ammeter + and - terminals of a CX3300 analog channel through a current sensor. It also provi...
Farmingdale, NJAgilent/Keysight CX1104A
- Manufacturer: Agilent - Keysight
The CX1104A selectable shunt Current Sensor enables dynamic current measurements from 1 μA to 15 A using the low-noise sensing technology. Using one of 6 available Calibrated Resistive Sensor Heads, CX1211A to CX...
Farmingdale, NJAgilent/Keysight U2032A
- Manufacturer: Agilent - Keysight
The U2032A is a BNC male to SMB female (50 ohms, 1.5 m) trigger cable for use with the Keysight USB/LAN power sensors. This enables your power sensor to synchronize with external instruments or events.
Farmingdale, NJAgilent/Keysight CX1206A
- Manufacturer: Agilent - Keysight
- Model: CX1206A
The CX1206A Sensor Head is an accessory for the CX1101A current sensor and expands the maximum measurement current up to 10 A. It also provides two banana jack terminals for ammeter + and - terminals of a CX3300 ...
Farmingdale, NJAgilent/Keysight CX1216A
- Manufacturer: Agilent - Keysight
The CX1216A Resistive Sensor Head is a sensor head for CX1104A selectable shunt current sensor. It includes a calibrated shunt resistor enabling accurate dynamic current measurement up to 0.25 A and 20 MHz wide b...
Farmingdale, NJAgilent/Keysight CX1213A
- Manufacturer: Agilent - Keysight
The CX1213A Resistive Sensor Head is a sensor head for CX1104A selectable shunt current sensor. It includes a calibrated shunt resistor enabling accurate dynamic current measurement up to 5 A and 20 MHz wide band...
Farmingdale, NJAgilent/Keysight CX1214A
- Manufacturer: Agilent - Keysight
The CX1214A Resistive Sensor Head is a sensor head for CX1104A selectable shunt current sensor. It includes a calibrated shunt resistor enabling accurate dynamic current measurement up to 3 A and 20 MHz wide band...
Farmingdale, NJ
Tip: Enter manufacturer, model or keyword