Building Filters
Agilent/Keysight E1834M
- Manufacturer: Agilent - Keysight
The E1834M is a beam bender that bends the incoming beam at a 90-degree angle and is designed for beam diameters of 9 mm or less. This referenced optics uses a high-performance horizontal mount to deliver a laser...
Farmingdale, NJAgilent/Keysight N7778C
- Manufacturer: Agilent - Keysight
The new N7778C value line tunable laser source offers a peak output power of more than +12 dBm, at least 75 dB/nm above its spontaneous emission level. It features typical wavelength repeatability of ±1.5 pm at t...
Farmingdale, NJAgilent/Keysight N4377A
- Manufacturer: Agilent - Keysight
The N4377A Lightwave Detector is a self-contained, USB-powered optical-electrical converter with built-in optical power meter capability. With amplitude and phase response calibration data stored on board the dev...
Farmingdale, NJAgilent/Keysight N4375E
- Manufacturer: Agilent - Keysight
The new N4375E single-Mode LCA is based on the latest N5222B network analyzer with a 2-port or 4-port configuration. This LCA is the ideal measurement solution for electro-optical components for 10 Gbit/s, 40 Gbi...
Farmingdale, NJAgilent/Keysight N4376E
- Manufacturer: Agilent - Keysight
The new N4376E Multimode LCA is based on the latest N5222B series network analyzers with 2-port or 4-port configurations. This LCA is the ideal measurement solution for electro-optical components for 10 Gbit/s, 4...
Farmingdale, NJAgilent/Keysight 81599B
- Manufacturer: Agilent - Keysight
HP 81599B Switch Cal: Calibration Available | As-is: Unit Sold AS-IS
Farmingdale, NJAgilent/Keysight IxVerify
- Manufacturer: Agilent - Keysight
Test routing and switching or 5G radio unit chip design Use elastic virtual test solution with support for globally distributed users Access packet and signal rate measurements and statistics Support automation w...
Farmingdale, NJAgilent/Keysight M8049A
- Manufacturer: Agilent - Keysight
The M8049A ISI channel boards can be used to emulate channel loss in receiver test setups. The boards are used to emulate channel loss for data rates of 32 Gb/s and higher. A choice of 21 PC board traces with dif...
Farmingdale, NJAgilent/Keysight M8047A
- Manufacturer: Agilent - Keysight
The M8047A PCI Express Re-driver enables the testing of devices with long back channels. Through a two-stage continuous-time linear equalizer and a linear output driver, equalize and boost the signal to the error...
Farmingdale, NJAgilent/Keysight N1076B
- Manufacturer: Agilent - Keysight
- Model: N1076B
Key Features: 125 MBd to 64 GBd data rate range (continuous) on electrical NRZ and PAM4 data signals Standards-compliant clock recovery (“Golden PLL”) with adjustable peaking and loop bandwidth (to 20 MHz) Lock o...
Farmingdale, NJAgilent/Keysight S8815A
- Manufacturer: Agilent - Keysight
The S8815A WLAN RF and Data Performance Toolset enables chipset and device manufacturers as well as test labs to validate the interoperability and performance of new WLAN features and products under uncompromised...
Farmingdale, NJAgilent/Keysight U7237A
- Manufacturer: Agilent - Keysight
- Model: U7237A
The U7237A 10GBASE-T transmitter electrical test fixture provides easy access to the 10GBASE-T Ethernet electrical signals, allowing you to effortlessly perform conformance testing and device characterization. Th...
Farmingdale, NJAgilent/Keysight J6820A
- Manufacturer: Agilent - Keysight
This lim plugs into the network analyzer, dna pro, dna mx and dna platforms. Connection to supported interfaces is by means of separately supplied external monitor/simulate cables, each specific to a particular v...
Farmingdale, NJAgilent/Keysight J6830A
- Manufacturer: Agilent - Keysight
- Model: J6830A
The J6830A 10BaseT, 10/100BaseTX LIM handles Ethernet and Fast Ethernet over unshielded twisted pair (UTP) Cable. The J6831A 10/100BaseFX LIM handles Fast Ethernet over multi-mode optical cable. The J6832 1000Bas...
Farmingdale, NJAgilent/Keysight N1250E
- Manufacturer: Agilent - Keysight
The N1250E is a high performance 12 m receiver cable. The cable is used to connect the measurement signal from a Keysight external receiver (10780C, 10780F, E1708A or E1709A) to a Keysight laser axis board (10897...
Farmingdale, NJ