Agilent/Keysight 85054D
- Manufacturer: Agilent - Keysight
- Model: 85054D
The Keysight 85054D economy mechanical calibration kit contains precision standard devices to characterize the systematic errors of Keysight network analyzers in the type-N interface. This kit also contains adapt...
Agilent/Keysight 03335-66522
- Manufacturer: Agilent - Keysight
The master oscillator of the reference section (that from which all reference signals are driven) is a 40 MHz Voltage Controlled Crystal Oscillator (VCXO) phase-locked to 10 MHz temperature stabilized oscillator ...
Farmingdale, NJAgilent/Keysight N4846A
- Manufacturer: Agilent - Keysight
The N4846A is an offset ground for use with N2795A/96A/97A single-ended active probes. The package contains two ground blades. Key Features: Low inductance offset ground for reduced ground lead inductance For use...
Farmingdale, NJAgilent/Keysight N4829A
- Manufacturer: Agilent - Keysight
The N4829A is a probe tip kit for use with N2870A-76A 2.5 mm passive probes. Key Features: Replaceable probe tips Package contains 10 of each rigid and spring-loaded probe tip For use with the N2870A-76A 2.5 mm p...
Farmingdale, NJ
Agilent/Keysight 85680-60054
- Manufacturer: Agilent - Keysight
A23 RF Converter has two conversion paths. In the first, the signal from the RF Attenuator in A5 front Panel is mixed with a signal from A23A4 First LO Distribution in A23A2 First Converter. The output is filtere...
$750 USDFarmingdale, NJAgilent/Keysight 69330A
- Manufacturer: Agilent - Keysight
The HP Model 69330A Relay Output Card provides 12 seperate form A (SPST, normally open) mercury-wetted contact outputs that reflect the status of 12 programmed data bits. Includes gate/flag circuits for exchange ...
Farmingdale, NJAgilent/Keysight N4828A
- Manufacturer: Agilent - Keysight
The N4828A is a standard ground spring for use with N2862B/63B/89A/90A 5 mm passive probes. Use this part to achieve high signal integrity probing. Key Features: A short ground spring to minimize ground inductanc...
Farmingdale, NJ
Agilent/Keysight 04194-66525
- Manufacturer: Agilent - Keysight
The Model 04194-66525 High Stability Oscillator Board Assembly board is installed only in 4194As which have Option 001. This board contains a dc voltage regulator and a crystal oven oscillator module.
Farmingdale, NJAgilent/Keysight 34137A
- Manufacturer: Agilent - Keysight
- Model: 34137A
The Keysight 34137A deluxe test lead set for the 3458A contains retractable sheath banana plugs. The 34137A test lead set includes: Test lead probes with retractable sheath (2) Fine tip probes (2) SMT Grabbers (2...
Farmingdale, NJAgilent/Keysight N4841A
- Manufacturer: Agilent - Keysight
The N4841A is a 9 cm dual lead socketed adaptor for use with N2795A/96A/97A single-ended active probes. The package contains two adaptors. Key Features: Allows connection to a 25 mil square pin or fine pitch acce...
Farmingdale, NJAgilent/Keysight N4840A
- Manufacturer: Agilent - Keysight
The N4840A is a 5 cm dual lead solder-in adaptor for use with N2795A/96A/97A single-ended active probes. This part is not included in the standard N2795A/96A/97A probe. The package contains two adaptors. Key Feat...
Farmingdale, NJAgilent/Keysight 69434A
- Manufacturer: Agilent - Keysight
The Event Sense Card monitors up to 12 external contact closures and interrupts the computer when one or more contacts change state with respect to the 12 reference bits stored on the card. Jumpers allow for reco...
Farmingdale, NJAgilent/Keysight N4848A
- Manufacturer: Agilent - Keysight
The N4848A is a probe tip-to-BNC adaptor for use with 10070D / 73D / 74D 5 mm passive probes. The package contains two adaptors. Key Features: Compatible with 10070D / 73D / 74D or old version 10070 / 73 / 74 pro...
Farmingdale, NJAgilent/Keysight N4837A
- Manufacturer: Agilent - Keysight
The N4837A is a standard ground lead for use with N2870A-76A 2.5 mm passive probes. The package contains two leads. Key Features: Oscilloscope probe ground lead 16 cm length (end-to-end) For a standard 5 mm oscil...
Farmingdale, NJAgilent/Keysight N4853A
- Manufacturer: Agilent - Keysight
The N4853A is a variable pitch browser for use with N2793A / N2819A differential probes. This is useful for browsing small geometry components with the N2793A or N2819A differential probe. The package contains tw...
Farmingdale, NJ
Tip: Enter manufacturer, model or keyword