Used Materials Testing in Shandong, China

Bi-Axial or Axial Averaging Extensometers – Model 3560

• Manufacturer: Epsilon

This extensometer is ideally suited for testing anisotropic materials such as advanced composites as well as for general purpose tests like determining Poisson’s ratio. The Model 3560BIA uses a design unique to E...

TE-UV2 Manual / Hydraulic

TE-UV2 Manual / Hydraulic Notch Cutter for Impact Specimen is specially designed for specimen preparation for impact specimen. Both manual type and hydraulic type are available to cutting the notch according to t...

High Temperature Clip-On Gages (700 °C) – Model 7641

These COD gages use a high-temperature capacitive sensor and do not require any cooling. They will operate up to the maximum temperature limit of most environmental chambers used in materials testing. The Model 7...

Deflection Gages(Deflectometers)

• Manufacturer: Epsilon Technology Corp

Deflection is measured with a single arm with an attached spherical contact tip, similar to those on a dial indicator. The full bridge strain gaged construction provides an electrical output compatible with any e...

HBRVS-187.5ST Senior Digital Brinell, Rockwell, Vickers universal hardness tester

• Manufacturer: Vickers

Main features： 1. Equipped Brinell, Rockwell, Vickers test methods 2. Electronic and electric loading, high precision sensor, with a unique closed-loop control system 3. Eyepiece structure with digital encoder, m...

Sheet Metal r-Value Extensometers – Model 3575AVG

Designed for measuring r-values in sheet metal testing, this extensometer averages the lateral strain at two locations. This model may be used simultaneously with the Model 3542 axial extensometer. Specimen Size:...

Fracture Mechanics Clip-On Gages – Model 3541

The Model 3541 is designed for determination of fracture mechanics parameters such as JIC, KIC, R-curve, fatigue crack growth rate (da/dN), and testing to standards such as E1820, E399, E647, etc. These COD gages...

High Temperature Axial Torsional Extensometers (1200°C or 1600°C) – Model 7650

• Manufacturer: Epsilon

Model 7650 extensometers are primarily used on round specimens tested in bi-axial test machines capable of simultaneous axial and torsional loading. All models are capable of bi-directional displacement in both a...

Circumferential Extensometers – Model 3544

Circumferential extensometers measure the change in circumference as the sample is compressed. This is considered by many researchers to be a more accurate way to determine diametral strain, since the measurement...

HVS-ZAD Digital Specimen Stage Vickers Hardness Control & Measurement System

• Manufacturer: Vickers

l This measuring system can be equipped with various kinds of Vickers Hardness Tester to upgrade unit tester to measuring system; l The computer controls the hardness tester, such as turret, light illumination ad...

Bi-Axial or Axial Averaging Extensometers – Model 3560

• Manufacturer: Epsilon

This extensometer is ideally suited for testing anisotropic materials such as advanced composites as well as for general purpose tests like determining Poisson’s ratio. The Model 3560BIA uses a design unique to E...

High Temperature, Low Strain, Extended Performance Capacitive Extensometers

• Manufacturer: Epsilon

Model 7650A extensometers measure strains with extremely high precision due to their design features and low strain range. All models are capable of tension and compression strain measurement, and may be used for...

Custom Extensometers

• Manufacturer: Epsilon Technology Corp

Custom sensor for fretting fatigue test system. Measures very small fret slip amplitudes at frequencies up to 60 Hz. Capacitive sensor with full scale displacement of 100 microns. High temperature bend fixture an...

Axial Torsional Extensometers – Model 3550

The Model 3550 extensometer is most often used on round specimens tested in bi-axial test machines capable of simultaneous axial and torsional loading. The extensometer is often customized for particular applicat...

High Temperature Diametral Extensometers (1000 °C) – Model 3580

This model is for diametral strain measurement with furnace and induction heating systems. Quartz rods and water-cooling allow the unit to be used for high temperature testing of metals, ceramics and composites. ...