Used General Laboratory Equipment in China

CWT Series High Current Flexible AC Probe
- Manufacturer: 其它品牌
Introduction: The CWT series AC current probe is a high-bandwidth, high-current AC current probe produced by PEM. It is based on the CWT series of slim, flexible, clip-on toroidal coils and has the ability to acc...
Beijing, China
TCP0030A Current Probe
- Manufacturer: 美国泰克/Tektronix
Introduction: The TCP0030A is an easy-to-use, high-performance AC/DC probe designed for direct connection to an oscilloscope via the TekVPI™ probe interface. This AC/DC measurement probe offers over 120MHz of ban...
Beijing, China
TIVM Series Isolation Measurement System
- Manufacturer: 美国泰克/Tektronix
Introduction: Whether designing an inverter, optimizing a power supply, testing a communication connection, measuring a shunt resistor, debugging an EMI or ESD problem, or trying to eliminate ground loops in a t...
Beijing, China
HZO30 Active High Frequency Probe
- Manufacturer: 德国RS惠美/RSHameg
Introduction: This probe is also called a single-ended RF probe or a single-ended high-frequency probe. It measures high-frequency signals, has 10 times attenuation, and a bandwidth of 1000MHz. It replaces Agilen...
Beijing, China
FT3470-50 Series Magnetic Field Tester (Flux Meter)
- Manufacturer: 日置/HIOKI
Introduction: It is very suitable for 3-axis magnetic flux density measurement, can be used in wireless charging evaluation system TS2400, and is suitable for evaluation tests based on ICNIRP2010 standards. It is...
Beijing, China
910 Series Gigabit Passive Probes 911/914/916 and other models
- Manufacturer: 英国比克/Pico
Introduction: PicoConnect 900 series low-intrusion, high-frequency passive probes are designed for microwave and Gigabit Ethernet up to 9GHz and 18Gb/s. They provide unprecedented performance and flexibility at a...
Beijing, China
Passive high voltage probe OIHVP250
- Manufacturer: 欧泰克/OItek
Introduction: OIHVP250: It is a replacement and upgrade product of HP9258R. It is a high-cost-effective, 100:1 attenuation, and bandwidth up to 250MHz high-voltage attenuation probe that can quickly measure high-...
Beijing, China
High Voltage Differential Probe OIDP-50
- Manufacturer: 欧泰克/OItek
Introduction: OIDP-50 high voltage differential probe, 50M bandwidth, 7000V (dc+ac peak), 100: 1/200: 1/500: 1/1000: 1 attenuation, compatible with any oscilloscope, can replace P5210 differential probe. Product...
Beijing, China
OI1040 passive voltage probe: attenuation ratio 1:1
- Manufacturer: 欧泰克/OItek
Introduction: The probe has an attenuation ratio of X1, a bandwidth of 40Mhz, a rise time of 8.75ns, and an input impedance of 1MΩ Technical parameters:
Beijing, China
HZ109 Differential Probe
- Manufacturer: 德国RS惠美/RSHameg
Introduction: Differential oscilloscope probe, also known as active differential probe, proportional differential probe, small voltage differential probe, bandwidth is DC~40MHz, attenuation ratio is 10:1 and 1:1,...
Beijing, China
P5100A High Voltage Probe
- Manufacturer: 美国泰克/Tektronix
Introduction: The P5100A is a high-voltage probe (2.5 kV) for high-frequency applications with low input capacitance. The probe can be compensated for use with plug-ins and oscilloscopes with a nominal input capa...
Beijing, China
P2221 Voltage Probe
- Manufacturer: 美国泰克/Tektronix
Introduction: P2221 is a 200-MHz passive voltage probe that allows 1X or 10X attenuation to be selected using a switch located on the probe head, and is compatible with MSO2000 and DPO2000 series oscilloscopes. P...
Beijing, China
TPP0201 Voltage Probe
- Manufacturer: 美国泰克/Tektronix
Introduction: TPP0201 probe is a 200MHz, 10X passive voltage probe with an input resistance of 10MΩ. For use with BNC oscilloscopes with 1MΩ/20pF (TPP0201) input. It is a passive probe with the highest bandwidth ...
Beijing, China
TPP0101 Voltage Probe
- Manufacturer: 美国泰克/Tektronix
Introduction: The TPP0101 probe is a 100MHz, 10X passive voltage probe with an input resistance of 10MΩ. For use with BNC oscilloscopes with 1MΩ/20pF (TPP0101) inputs. It is the highest bandwidth, lowest probe lo...
Beijing, China
CM 605 Hook Table
- Manufacturer: 法国/CA
Introduction: With 10AAC/DC weak current test, analog AAC/DC output can be used for data recording, auto range & ADC have auto range, with data hold & PEAK DC current test. Applicable to industrial inspection an...
Beijing, China
Nanbei SYD General Laboratory Equipment
- Manufacturer: Nanbei
- Model: SYD
Good condition Nanbei SYD General Laboratory Equipment available between 2008 and 2023 years. Located in China and other countries. Click request price for more information.
China