Used Granulators & Pelletizers

CUMBERLAND 184 GRANULATOR 17773

• Manufacturer: Cumberland

Cumberland model 184 granulator, S/N 239150-86501, 8″ x 10″ feed throat, 3 knife open rotor, 2 bed knife, 7.5 HP 230/460-volt motor – wired 480-volts, insulated tray feed hopper and body panels, “homemade” bin di...

NELMOR V68 GRANULATOR 17761

• Manufacturer: Nelmor

Nelmor model V68 granulator, S/N 00E03872, 6″ x 8″ feed throat, 3 knife open rotor, 1 bed knife, 5 HP 230/460-volt 1745 RPM motor, insulated tray feed hopper, 2″ OD left hand airveyor discharge, 1/4″ holes screen...

CUMBERLAND 1524B GRANULATOR 16579

• Manufacturer: Cumberland

Cumberland model 1524B granulator. S/N none. 15″ x 24″ feed throat, new 3 knife high shear rotor, 2 bed knife, 50HP 230/460V motor. Tray feed hopper. Mounted to a 53″ tall x 65″ wide x 69″ deep gaylord gravity di...

NELMOR G16295M1 GRANULATOR 12420

• Manufacturer: Nelmor

Nelmor model G16295M1 granulator. S/N 7406-6633. 16″ x 29.5″ feed throat, 3 knife solid rotor, 2 bed knife, 2 x 15HP 230/460V motors. Left hand side feed insulated conveyor feed hopper. Manual “twist” jack screw ...

CUMBERLAND 11″ 48 KNIFE PELLETIZER 18986

• Manufacturer: Cumberland

One (1) used 11″ Cumberland “Quietizer” pelletizer with 48 knife solid helical rotor. Powered by a 25 HP A/C motor and Yaskawa model V1000 inverter. Air actuated top pull roll.

RAPID 1831C GRANULATOR 14282

Rapid model 1831C granulator s/n 70.345 18″ x 31″ feed throat 3 knife open rotor 2 bed knife tangential cutting chamber. 12″ x 12″ left hand profile chute only in-feed hopper or standard double wall tray feed hop...

CUMBERLAND 8″ 48 KNIFE PELLETIZER 18116

• Manufacturer: Cumberland

One (1) Used 8″ Cumberland “Quietizer” pelletizer. S/N 264550-940006. Rotor is driven by a 15 HP A/C motor with inverter. 3 HP A/C pull roll motor. Has (48) knife solid helical rotor. Air actuated nip rolls. Soun...

CUMBERLAND 1837B GRANULATOR 18885

• Manufacturer: Cumberland

One (1) used Cumberland model 1837B granulator. 18″ x 37″ feed entrance with a three (3) knife high shear rotor. Two (2) bed knives. Rotor is v-belt driven by a 100 HP 1780 RPM North American inverter duty motor ...

CUMBERLAND 1524B GRANULATOR 5823

• Manufacturer: Cumberland

Cumberland model 1524B granulator. S/N none. 15″ x 24″ feed throat, 3 knife radial rotor, 2 bed knife, 50HP 230/460V motor. 54″ tall gaylord base, discharge tray feed hopper. Starter and controls are not included...

NELMOR G1424MB GRANULATOR 16502

• Manufacturer: Nelmor

Nelmor model G1424MB granulator. S/N 8709-24998. 14″ x 24″ feed throat, 3 knife solid rotor, 2 bed knife. 75 HP 460V 1775 RPM motor. Conveyor feed hopper mounted on a short leg base, starter and controls are not ...

CUMBERLAND 1828B GRANULATOR 10875

• Manufacturer: Cumberland

Cumberland model 1828B granulator. S/N 49410-779. 18″ x 28″ feed throat, 3 knife steep angle rotor, 2 bed knife. 75HP 460V motor tray feed hopper, 8″ airveyor discharge mounted on a leg base. Starter and controls...

CUMBERLAND 1837B GRANULATOR 17054

• Manufacturer: Cumberland

Cumberland model 1837B granulator. S/N 50510-7718. 18″ x 37″ feed throat, 5 knife steep angle rotor, 2 bed knife, 100HP 230/460V motor. Conveyor feed hopper, 8″ airveyor discharge mounted on a step base. Starter ...

CUMBERLAND 1837B GRANULATOR 16345

• Manufacturer: Cumberland

Cumberland model 1837B granulator. S/N 50210-646-R. 18″ x 37″ feed throat, 3 knife steep angle rotor, 2 bed knife. 125HP 460V motor, tray feed hopper, mounted on a 22.5″ tall leg base, 8″ airveyor discharge. Star...

CUMBERLAND 3250 GRANULATOR 14246

• Manufacturer: Cumberland

Cumberland model 3250 granulator, no S/N. 32″ x 50″ feed throat, 9 knife staggered rotor with 3 blade off-set, 200HP 460V 1,190 RPM motor. Hard faced rotor and cutting chamber, twin flywheel, 14″ FK350 airveyor d...

CPM 1272DS Granulators & Pelletizer

• Manufacturer: CPM
• Model: 1272DS

Good condition CPM 1272DS Granulators & Pelletizers. Located in Netherlands and other countries. Click request price for more information.