Used Processing in Victoria, Australia

BAC BALTIMORE RCT2236
- Manufacturer: Baltimore Aircoil
Baltimore Aircoil Australia (BAC) cooling tower - Fibreglass. One unit available
Melbourne, Australia
TRONICS TDS031CDE
- Manufacturer: TRONICS
Used Tronics TDS031CDE Front/Back & Wrap, Labeller, Packaging Machinery. Front/Back and Wrap pressure sensitive labeler capable of labeling a wide range of round, flat sided and oval bottles at speeds which could...
Melbourne, Australia
A & G ENGINEERING 10m x 400
- Manufacturer: A&G Mercury
Stainless steel screw conveyor, screw auger. 10m long x 400mm dia 350mm pitch 4mm flight thickness 7.5kw drive (415V). Drive motor is at the discharge end. 400mm x 500mm outlet 600mm x 500mm inlet
Melbourne, Australia
Expandable Roller Conveyor
Expandable skate wheel roller conveyor. Height adjustable and currently set at 800mm - 750mm Lockable casters. In ok condition.
Melbourne, Australia
HARWOOD ENGINEERING 2.7 X 0.5
- Manufacturer: HARWOOD ENGINEERING
Flat belt conveyor. Stainless steel construction. 240V with a Variable speed controller and E-stop. SS Table 1500mm X 445mm Ex chocolate factory. Unit in good condition. Unit runs well.
Melbourne, Australia
Sanitary Conveyor
Sanitary Conveyor. Stainless steel construction. Single phase 240V with VSD, Start/Stop and optical sensor. 0.18kW geared motor. Automatic and manual mode. Conveyor mounted to casters. Belt speed 3.4 metres/min. ...
Melbourne, Australia
SS 1400 x 1950
- Manufacturer: SS
Flat belt food grade conveyor. 0.75kw 30 rpm. Stainless steel rollers. 1400mm wide x 1950mm long.
Melbourne, Australia
JACMOR ENGINEERING 4.5 x 570
- Manufacturer: JACMOR ENGINEERING
Mild steel screw conveyor. 4.5m long x 570mm wide trough. Screw dia is 450mm. Screw pitch is 400mm SEW geared drive 5.5kw 54 rpm. 200mm x 1200mm inlet. 450mm x 450mm outlet. Last used to move sand. Run and tested.
Melbourne, Australia
SS 1.2 x 300
- Manufacturer: SS
Stainless steel mesh conveyor - food grade 1.2m long x 300mm wide. Complete with 415V Geared motor.
Melbourne, Australia
CONTECH ENGINEERING 5.5 x 340
- Manufacturer: CONTECH ENGINEERING
Flat belt food grade conveyor. 5.5m long x 340mm wide. stainless steel frame with mild steel legs mounted on castors. SEW 0.37kw 21-104 rpm Mechanical variable speed drive. 800mm height from ground.
Melbourne, Australia
BENISON & CO ES-200
- Manufacturer: Benison & Co.
Benison and Co shrink sleeve heat tunnel. Stainless steel construction. Ideal for body label shrink sleeves. 3 Phase, 415V Up to 200C temp. Manual height adjustment. Unit in good condition.
Melbourne, Australia
FERRUM DSZ-U R 1250
- Manufacturer: Ferrum
The vertical basket centrifuges of the type DZF Pull Action Filter centrifuges are designed for different applications in solid-liquid separation. The discharge system is a Ferrum innovation (patented) and functi...
Melbourne, Australia
Reverse Osmosis Housing with Membrane
Reverse Osmosis Housing with 3 membranes. Housing 3250mm Long Diameter 6.5 Inches Each filter membrane measure 960mm X 160mm in diameter. 3 inch Input and Output with triclover fittings. Reverse osmosis removes c...
Melbourne, Australia
IOPAK SD5050
- Manufacturer: Iopak
Sealing speed: 19 m/min | Carton size: Min 150 L x 170 - 480 W x 120 - 600 H mm | Tape size: 48 mm | Power supply: 1-Phase, 240V, 50Hz | Power consumption: 0.4 kW
Melbourne, Australia
SATAKE 6170 x 150
- Manufacturer: SATAKE
Mild steel SATAKE screw conveyor. 2 piece screw conveyor. Driven by 0.75kW 415V 3 Phase SEW geared motor. Screw operating at 66 RPM Two outlets. Runs well.
Melbourne, Australia