Used Bottling, Filling & Packaging in Oregon, USA

Angelus 60L 6-Head Steam Flow Can Seamer

• used

• Manufacturer: Angelus
• Model: 60L

Pneumatic Scale Angelus 60L – 404 Dia Can Angelus 60L can seamer last running 404 dia cans. Features driven lower lifters and steam flow. Sold in As-is, Where-is condition.

Angelus 60L 6-Head Steam Flow Can Seamer

• used

• Manufacturer: Angelus
• Model: 60L

Pneumatic Scale Angelus 60L – set on 300 x 407 cans Angelus model 60L can seamer last running 300×407 cans. Note that change parts are incomplete. Features driven lower lifters, steam flow turret, single knife se...

Angelus 60L 6-Head Steam Flow Can Seamer

• used

• Manufacturer: Angelus
• Model: 60L

Pneumatic Scale Angelus 60L – 300×407 cans Angelus model 60L can seamer last running 300×407 cans (change parts are incomplete). Features driven lower lifters, steam flow turret, single knife separator, filler dr...

2012 ROTOCHOPPER Go-Bagger 250

• used

• Manufacturer: Rotochopper
• Model: GO-BAGGER 250

Excellent condition. Stored inside. Hours: 500 | Engine hours: 500 | Engine: 25HP Kubota

2006 ROTOCHOPPER Go-Bagger 250

• new

• Manufacturer: Rotochopper
• Model: GO-BAGGER 250

Resina Model S-30 Capper

• used

• Manufacturer: Resina

Pack West Model A120 "Torquer"

• used

• Manufacturer: Pack West

Item is a used, Pack West model A-120, fully automatic, cap torquer. The machine is designed to apply additional torque to caps having the threads previously engaged with the container, It is often utilized after...

Zalkin 6-head rotary Plastic Capper

• used

• Manufacturer: Zalkin
• Model: CA6

condition: Very Good Item is a used, Zalkin, 6 head, freestanding, rotary plastic capper. The machine operates from left to right (clockwise rotation). It is currently set up for 38 mm cap. It utilizes "pick and ...

McBrady Orbit Rinser

• used

Item is a used, McBrady, model 200,orbit rinser. The machine is equipped with a 54 inch diameter wheel and is currently set up for large mouth jars, including large round containers with 110MM closure.. It is equ...

Angelus 40P Seamer

• used

• Manufacturer: Angelus
• Model: 40P-MSLF

Angelus Model 40P-MSLF can seamer Angelus Model 40P 4-head can seamer with MSLF (Modified Straight Line Feed); s.n. 12911398. The unit is currently set for 211 steam flow (missing a few change parts); and include...

Accutek Filler A-17

• used

• Manufacturer: Accutek

2017 Accutek Filler A-17 The AccuVac Series are ideal for small filling solutions, such as light oils or other liquids in small amounts. It was last filling soap and pulled out due to low demand.

GAI Monoblock counterpressure 16 valve rinser, filler, crowner

• used

• Manufacturer: Gai

One Available - Item is a GAI monoblock counterpressure rinser filler crowner. The machine is a model 16/16/3 with 16 rinse heads, 16 fill heads and a 3 head crowner. The machine was last running 12 oz. long neck...

Pacific 6 head rotary piston filler

• used

• Manufacturer: Pacific

One available - Item is a used Pacific Rotary Piston Filler designed for hot fill products. This volumetric filling machine operates in a six-station rotary configuration with 11" valve spacing. It accommodat...

2010 Accutek AVF

• used

• Manufacturer: Accutek

Item is a used, Accutek, automatic, volumetric piston filler. This is a 4 head machine with piston fill capacity of 4 oz. to 32 oz. fills. It is equipped with 5/8 diameter, extended length nozzles to accommodate ...

Pneumatic Scale Angelus 53P DF Seamer

• used

• Manufacturer: Angelus
• Model: 53P

Angelus 53P DF steam flow can seamer Angelus 53P steam flow seamer set to run a #10 can (603×700). The machine has double bearings on the bottom to hold the turret, a detachable handwheel, plus bolt-in lifter bus...