Used Edgebanders in Flanders, Belgium

2013 BRANDT HIGHFLEX 1220 - KDF 220 Squaring and edgebanding machine single sided

• Manufacturer: Brandt
• Model: KDF220

Edges up to 3 mm from coil, 6 mm strips Workpiece width min: When Workpiece thickness 12-22mm 70 mm* When Workpiece thickness23-40 mm, 120 mm* When Workpiece thicknesse 41-60mm 150 mm* *in relation to workpiece l...

2008 HOMAG KAL 310/9/A20/S2 Squaring and edgebanding machine single sided

• Manufacturer: Homag
• Model: KAL

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable ...

1996 IMA COMPACT/U/PC/6220/F Squaring and edgebanding machine single sided

• Manufacturer: IMA
• Model: Compact PC

Feed speed 10 - 20 m/min Workpiece thickness 10 - 50 mm Workpiece width min. 85 mm (35 mm overhang) Edge thickness 0.4 - 20 mm in strips, 0.4 - 3 mm from the roll (Max. edge section 55 x 20 mm) Equipment: Joint m...

2006 HOMAG OPTIMAT KAL 310/6/A3/S2 Squaring and edgebanding machine single sided

• Manufacturer: Homag
• Model: Optimat

Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine f...

2001 BIESSE MILLENNIUM Edge bander single sided

• Manufacturer: Biesse

CNC controlled edging machine serves to edge curved and shaped panels Panel thicnkess: 16 - 50 mm. Edge thickness: 0,8 - 3 mm. Dimensions: min 400 x 400 mm; max 1800 x 1800 mm 650 x 2500 mm unit 1: glue roller wi...

2011 KOCH CENTRONIC Cutting-, drilling and dowelinserting machine

• Manufacturer: Koch

Machine designed for machining solid wood doors with frame and raised panels Workpiece dimensions Length 150 - 3000 mm Width 40 - 300 mm Thickness 20 - 60 mm Material: hard woods/soft woods Machine equiped with 2...

1988 HOLZ-HER BENJAMIN 1491 Edge bander single sided

• Manufacturer: Holz-Her

edges on roll scissor system pressure roller panelfeed by rollers on top (0,09 kW) moulding top and bottom (each 0,6 kW)

1994 KOCH SBFD-35-B - BL25 Cutting-, drilling and dowelinserting machine

• Manufacturer: Koch

Double sided machine, end-cutting, shaping, drilling and dowelinserting, as well as drilling from top and aside Workpiece length: 140 - 2500 mm. Werkpiece width: 25 - 170 mm. Werkpiece thickness: 15 - 45 mm. Fixe...

1984 IMA FBA/II/420 Double-end profiler, automatic

Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspe...

1987 BRANDT PF 10/42 Postforming machine

• Manufacturer: Brandt
• Model: PF10/42

Min/Max. workpiece length 1800 / 4200 mm. Max. profile height 200 mm. Min. Workpiece thickness 16 mm Working height 950 mm. Power installed 12 kW

1990 BRANDT PF 10-42 Postforming machine

• Manufacturer: Brandt
• Model: PF10/42

Min/Max. workpiece length 1800 / 4200 mm. Max. profile height 200 mm. Min. Workpiece thickness 16 mm Working height 950 mm. Power installed 12 kW

1994 BRANDT FP 12 Two-side lip trimmer

• Manufacturer: Brandt
• Model: FP12

Static contour trimming machine for rounding off edges to softformed or postformed panels. The machine has a tracing roller and a trimming motor and carries out both symmetric and asymmetric copying work (by mean...