- Trusted Seller
2003 SCM SCM 10/S 3 110
- Manufacturer: SCM / SCMI
Good running condition 43" wide, 3 head knife planer sander helical inserts planer head followed by 2 sanding heads 5,500 lbs 460 volt, 3 phase
- Trusted Seller
2001 Stainless Steel Tailgate Sander- Stock #: 0081
9in Stainless Steel Tailgate Sander Augger Frame material: Steel
DeForest, WI 
Safety Speed, 4375 Wide Belt Sander
- Manufacturer: Safety Speed
The 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt translates to increased capacity, less heat accumulation, less maintenance and...
Dundee, NY
2010 Grizzly G5394 6" x 186" Stroke Sander
- Manufacturer: Grizzly
- Model: G5394
2010 Grizzly G5394 6" x 186" Stroke Sander - Motor: 3 HP, 220V, single-phase, 17A - Sanding belt speed: 3500 SFPM - Sanding belt size: 6" x 186" - Table Size: 58" x 23-3/4" - Table vertical travel: 24" - Platen ...
$1,500 USDDundee, NYCARBORUNDUM,38657,80GRIT ZIRCONIA ALUMINA RESIN CLOTH 51"X126 3 BELTS SKID OF 14
- Manufacturer: Carborundum
CARBORUNDUM,38657,80GRIT ZIRCONIA ALUMINA RESIN CLOTH 51"X126 3 BELTS SKID OF 14 BOXES YES YOU WOULD GET FULL SKID FOR THE PRICE OF $1500 What's Included? See photos. We try our best to provide full details of ea...
$1,500 USDGalion, OH
Opti-Sand L202 Brush Sander
Opti-Sand L202DB Profile / Moulding / Denibbing Sander 230V • 3-Phase • 3 Top Heads + 1 Side Head Layout Manufacturer: Opti-Sand Model: L202DB Serial Number: 196110 Electrical: 230V, 3-Phase, 60 Hz, 20A Condition...
- Trusted Seller
2004 Cemco 2000 Single Head Sander
- Manufacturer: Cemco
Cemco 2000 Wide Belt Fair/good condition. It starts and runs until we unplugged it 12 years ago Belt size 37 x 75 2004 Single head 1- 5” roller top, 2 - 5” rollers bottom, 1 rubber covered, 1 steel. No plat...
USA 
Oscillating Spindle Sander
2Hp 115/230V Features: Precision ground table provide a stable work surface. Table tilts 45 degrees for added versatility. Unique corner cut table design allows better operator position. 1-1/2” Spindle oscillatio...
$2,190 USDCharlotte, NC- Trusted Seller
LOADED Boarke BKM-43103RRK (3) Head 42″ Wide Belt Sander (3 NEW DRUMS)
This is a heavier duty rating 2013 Boarke BKM-43103RRK wide belt sander. It has a 42″ width capacity, a 5″ height capacity running 43″ X 103″ abrasives. The rubber on the drums were thin from being dressed so we ...
19-38 Drum Sander
Perfect for the small shop or woodworking enthusiast, the SuperMax® 19-38 Drum Sander reduces the tedium of hand sanding, speeds up the sanding process, and produces more consistent results! The 19-38 features IN...
$2,099 USDCharlotte, NC- Trusted Seller
Northtech NT MBS12‑2T1R2L‑EL Five Head Moulding Brush Sander
This machine has a 4-3/8″ X 12-1/2″ capacity and feed speeds up to 105 FPM. A very cost-effective solution to many common sanding needs. NT MBS12-2T1R2L-EL Five Head Moulding Brush Sander Working width 1-3/4″ – 1...
Kingston, TN - Trusted Seller
Burr-King 562 1″ x 42″ 3 Wheel Belt Sander
- Manufacturer: Burr King
Product Description General Info Stock #: 114250077 Location: Decatur, GA Brand: Burr-King Model: 562 Approx. Shipping Weight: 200 Lbs. Approx. Shipping Dimensions: 4′ L x 4′ W x 6′ H Skidding Fee: $100 Specifica...
Stone Mountain, GA - Trusted Seller
Northtech NT ES636SE 6″ X 36″ Capacity Single Sided Oscillating Edge Sander
This machine features 6″ X 36″ platens and is powered by a 3 HP main motor. The oscillating stroke is 3/8″. NT ES636SE Edge Sander 3HP main motor; 3PH, 230V/460V Dual Voltage (3/8″) oscillating stroke Easy elevat...
Kingston, TN - Trusted Seller
Northtech NT ES1248SE 12″ X 48″ Capacity Single Sided or Dual Sided Oscillating Edge Sander
This machine features 12″ X 48″ platens and is powered by a 7.5 hp main motor. The oscillating stroke is 1/2″. Available in either single sided or dual sided versions. (single sided pictured) NT ES1248SE Edge San...
Kingston, TN - Trusted Seller
2017 Biesse Viet Opera 5 (3) Head 53″ Wide Belt Sander With (3) Segmented Platens
- Manufacturer: Biesse
This 2017 Biesse Viet Opera 5-3.3 CKF 53″ wide calibrating sander has a total of 3,277 run (conveyor) hours. This is a very loaded, lower hour, very hard to find wide belt sander. This Opera does have a constant ...
Comec LON-LS Sander
- Manufacturer: Comec
- Model: LON-LS
Good condition Comec LON-LS Sanders available between 1997 and 1998 years. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
