Used Material Handling in Bremen, Germany

Stainless steel container 6.5 cbm

• Manufacturer: Sielmann

Design: cylindrical, lying on 4 feet, height-adjustable, with conical bases, Armaflex insulation around cylinder and bases. Connections: 1 manhole Ø 450 in the front, as well as 1 x DN 100 and 1 sight glass DN 15...

Stainless steel container 20 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, height-adjustable, with upper domed base and lower conical base. Half-pipe coil around cylinder, 3 circuits, and pillow plates on the lower base, designed for 3 bar operat...

Stainless steel container 2.5 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, height-adjustable, with conical bases, pillow plates around the cylinder and lower base, operating pressure 3 bar, insulation around the cylinder and lower base, fully wel...

1000 Liter Container, Aisi 316

remarks: Frame, Aisi 304; 1 container with smaller dents, 1 other container with stronger dents (see photos)

2000 liter bulk container, Aisi 304

• Manufacturer: Thielmann (UCON)

remarks: Frame, Aisi 304; the manhole cover of 1 container is missing

Stainless steel container 22.3 cbm

• Manufacturer: Sielmann

Content: 22,3 cbm | Material: stainless steel | Material specification: V2A | Cyl. height: 2500 mm | Upper floor: 700 mm | Total height: 3200 mm | Piece: 1 | Stock: Nuremberg area

Stainless steel container 35 cbm

• Manufacturer: Sielmann

Operating data: according to the nameplate. 1 tank = -0.4/+4 bar operating pressure, 150 °C. 1 tank = -0.4/+3 bar operating pressure, 110 °C. 1 tank = +3 bar operating pressure, 120 °C. 1 tank = +4 bar operating ...

Stainless steel container 0.65 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, with curved bottoms, designed for 6 bar operating pressure. Connections: 2 x DN 300 in the cylinder, each bottom centered DN 200, with outlet DN 25

Stainless steel container 120 cbm

• Manufacturer: Sielmann

Design: Upright cylinder with inwardly curved lower conical base, concrete base, with upper conical base. Propeller agitator installed at an angle in the cylinder. Insulation around the cylinder, fully welded cov...

Stainless steel container 25 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on three feet with dished ends. Connections: 1 manhole 350 x 450 mm in the cylinder, 2 x DN 50 in the upper end, 1 x DN 50 in the lower cylinder, and 3 1/2" sockets, DN 65 outlet, bo...

Bulk container 3 cbm

• Manufacturer: Sielmann

Wall thickness: 3 mm on all sides Design: rectangular, standing on 4 feet, with forklift pockets, with internal struts Connections: 1 opening Ø 250 in the upper base, 2 x DN 50 DIN 11851 G upper base, 1 rectangul...

Stainless steel container 20.8 cbm, insulated

• Manufacturer: Sielmann

Design: cylindrical, standing on 5 feet, height-adjustable, with bracing, with conical bottoms, 50 mm insulation around the cylinder and lower bottom, fully welded stainless steel cover. Connections: 1 manhole 34...

Stainless steel container 21.4 cbm

• Manufacturer: Sielmann

Design: cylindrical, horizontal in a galvanized steel frame, on bearing saddles, height-adjustable, with curved bottoms. Connections: 1 manhole 340 x 440 mm in the front end, 1 x DN 101 x DN 50 on the upper apex ...

Stainless steel container 1.5 cbm, insulated

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, height-adjustable, with curved bases, air insulation around the cylinder, fully welded stainless steel cover. Connections: 1 manhole 310 x 420 mm in the cylinder, DN 80 ve...

Stainless steel container 2.8 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, height adjustable, with conical bases, insulation around the cylinder and lower base, stainless steel cover, fully welded. Connections: 1 hinged lid dome DN 450 in the upp...