Used Industrial Automation in Saxony, Germany

THK linear guide rail

Linear guide rail THK SR20-2140L(GK) RAIL mm all holes: Ø 6 / 9.5 mm, depth of blind hole: 8.5 mm Spare part from the company MURATA MACHINERY EUROPE GmbH New !

LINMOT linear motor with slider

Linear motor with slider LINMOT PS01-23x160 stator with approx. 0,8 m connection cable used, tested !

INA linear unit

Linear unit INA RUE 55 W2 / 1740 ( RUE55W3/1740 ) 1740 mm 2x linear guide carriage 1x damping unit New !

THK linear guide carriage with linear guide rail

Linear guide carriage, with linear guide rail THK HSR25 Linear guide carriage: Length: 80 mm, width: 70 mm, height: 29 mm Hole spacing: 57 / 45 mm, 4x threaded hole: M8 x 1.25, depth: 16 mm ( continuous ) Linear ...

THK linear guide carriage with linear guide rail

Linear guide carriage, with linear guide rail THK HSR30 Linear guide carriage: Length: 94 mm, width: 60 mm, height: 37 mm Hole spacing: 40 mm, 4x threaded hole: M8 x 1.25, depth: 12 mm Linear guide rail: Length: ...

THK linear guide carriage with linear guide rail

Linear guide carriage, 2 pieces, with linear guide rail THK 2x HSR25 Linear guide carriage: Length: 80 mm, width: 70 mm, height: 29 mm Hole spacing: 57 / 45 mm, 4x threaded hole: M8 x 1.25, depth: 16 mm ( continu...

DOMINO MODUL AG Linear module

Linear module, linear drive DOMINO MODUL AG DOMINO® LM200H-100 Base plate: 100 x 80 mm, with guide ring: Ø 55 mm 2x sensor cable, approx. 0.4 m long used, tested !

CHAMBRELAN telescopic slide guide

Telescopic runner, with double extension, 2 pieces CHAMBRELAN 800 mm used, tested !

PAGUS trapezoidal threaded spindle

• Manufacturer: Pagus

Trapezoidal thread spindle, threaded spindle, with nut PAGUS Shaft thread: M20 x 1.0, thread length: 19 mm Shaft diameter: Ø 25 mm, length: 37 mm Shaft diameter: Ø 30 mm, length: 27 mm Shaft diameter: Ø 40 mm, le...

MEHAG vibratory feeder

Vibratory feeder, sorting vibrator, MEHAG approx. 0.5 m connection cable with plug New !

THK ball screw with nut

Ball screw with nut, ball screw drive THK BLK2525D Thread: Ø 25 mm Shaft piece: Ø 15 mm, length: 27 mm, groove width: 5 mm Thread: M20 x 1.0, length: 14 mm, groove width: 5 mm Bearing seat: Ø 20 mm, length: 25 mm...

NSK ball screw with nut

• Manufacturer: NSK

Ball screw with nut, ball screw drive NSK W4011-176D-C2Z 98L6-0067 Thread: Ø 40 mm Shaft piece: Ø 28 mm, length: 57 mm Thread: M30 x 1.5, length: 27 mm Bearing seat1: Ø 30 mm, length: 27 mm Bearing seat2: Ø 30 mm...

NSK ball screw with nut

• Manufacturer: NSK

Ball screw with nut, ball screw drive NSK W4014-124D-C2Z 98L6-0035 Thread: Ø 40 mm Shaft piece: Ø 28 mm, length: 57 mm Thread: M30 x 1.5, length: 27 mm Bearing seat1: Ø 30 mm, length: 27 mm Bearing seat2: Ø 30 mm...

SCHUNK angular gripper

• Manufacturer: Schunk

Angular gripper, 2-finger angular gripper SCHUNK GM 400 313098 used, tested !

REXROTH ball screw spindle

• Manufacturer: Bosch - Rexroth

Ball screw with nut, ball screw drive REXROTH 685 x Ø 24 mm Thread: Ø 24 mm Shaft stub: Ø 17 mm, length: 15 mm stub shaft: Ø 15 mm, length: 30 mm with ball nut: R51324014 used, tested !