Used Honing Machines in Saxony, Germany

Polishing Machine KEIN TYPENSCHILD

• Manufacturer: KEIN TYPENSCHILD

Disc right: Ø 150mm x W: 50mm; disc fitted with emery burrs Disk left: Ø 125mm x W: 50mm; disk equipped with emery burrs support on both sides Machine mounted on stand with base plate. Operation via on/off switch

Wheel Grinder - Double -

Double sanding bench, mounted table unit currently clamped sanding discs: right Ø 180 x 6mm and left Ø 120 x 25mm with sanding supports, right and left, adjustable by 50mm Grinding guard on both sides Grinding bl...

1977 Werkzeugmaschinenfabrik Frunse 2A78

• Manufacturer: Werkzeugmaschinenfabrik Frunse
• Power requirement: 4.22 kilowatt

There is a movable table that moves lengthwise and crosswise.

1964 WMW Suhl SIX 160x1000L

• Manufacturer: WMW
• Power requirement: 1.1 kilowatt

Application: vertical internal cylindrical grinding of shafts face, and center grinding with shaft grinder. Spindle head technical details: -equipment shank grinder Ø 13mm 60°; clamping element Ø 6mm shank clampi...

WMW nicht bekannt

• Manufacturer: WMW

Grinding machine for twist drill cutting angle 30° / 40° Hole of the grinding disc Ø 20mm Adjustment path Z = 230mm manual Headstock can be swivelled 360° via radial scale Table with clamping support LxW: 270 x 1...

TRUMPF P 1000

• Manufacturer: Trumpf

WELDING EDGE SHAPER - GRINDING MACHINE or PLATE SHAPER Hand tool Application: cutting and notching of plate-shaped workpieces Material thickness depends on material (max. 10mm) Tool = lower knife (die) and upper ...

1980 VEB GALVANOTECHNIK CS 175

• Manufacturer: Galvanotechnik
• Power requirement: 0.4 kilowatt

technical data: - 4 holes Dm= 10mm are available at the base for mounting on the worktable. - VEM CS 175 motor with 220/380V-50Hz; (1,9&1,1A) Protection class P33, - connector plug CEE 16 Equipment: - with grindi...

1986 JOHN SCHEHR SET Tr 2x200

• Manufacturer: JOHN SCHEHR
• Power requirement: 0.9 kilowatt

Double sanding block mounted on stand currently clamped grinding wheels 2x, Ø 80x x 30mm right and Ø 160 x 30mm left Handrail, movable Grinding guard Holder for cooling water tank

VEB GALVANOTECHNIK DS 200/2

• Manufacturer: Galvanotechnik
• Model: DS 2002
• Power requirement: 0.7 kilowatt

Double sanding block, table-top unit mounted on stand with handrail on both sides, adjustable/swiveling Sanding guard on both sides Use max. sanding discs Ø 200mm max. sanding disc thickness 30mm sanding disc cur...

VEB GALVANOTECHNIK DS 200/2

• Manufacturer: Galvanotechnik
• Model: DS 2002
• Power requirement: 0.9 kilowatt

Double sanding block; table-top unit with sanding supports left/right, horizontally adjustable 30mm max. sanding discs Ø 200mm max. grinding wheel thickness 32mm currently clamped sanding discs on the sanding blo...

1977 VEB GALVANOTECHNIK DS 200-2

• Manufacturer: Galvanotechnik
• Power requirement: 0.9 kilowatt

Double grinding block Main switch - On/off switch Connection for dust extraction Currently attached grinding wheels: Ø 140 x 25 and Ø 150 x 25 mm

1998 VAM VAM300

• Manufacturer: Lapidello - Vam
• Power requirement: 3 kilowatt

Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment ...

Spotting Plate FLP 1000

• Manufacturer: Gehring

This work wheel can be used, for example, on a disk sanding, fine sanding and/or lapping machine. Application: Material removal for “gentle” processing of the workpiece surface, as well as keeping the tools flat ...

INDUMASCH KF 500

• Manufacturer: Indumasch
• Model: KF 500
• Power requirement: 1.1 kilowatt

EDGE BURRING MACHINE, table-top unit Application: chamfering, deburring Equipped with milling head Ø 65mm with carbide inserts Motor speed 2780 rpm. Workpiece holder via prism 45°, with 2 supports lxw: 500 x 40mm...

1996 ESTARTA 312

• Manufacturer: Estarta
• Model: 312
• Power requirement: 14 kilowatt

CIRCULAR GRINDING MACHINE - alloyed round steels as well as (grooving process) throughfeed process. - In the plunge process, the plunge-cut length is max. 160mm. - Workpiece removal automatically via rail (its fu...