Used Processing in Bremen, Germany

1000 Liter IBC Container, Aisi 304

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame, Fe (galvanized); 1 additional manhole cover with built-in Liquifant; small dents in the upper bottom (see photos)

4500 liter coolable agitator tank, Aisi 304 with blades agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket with trickle ring - only suitable for pressureless cooling; a rectangular sheet was cut out o...

445 liter IBC Container, Aisi 316

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame, Fe (galvanized; slight corrosion); Manhole diameter approx. 395 mm (manhole cover fastening screws not completely complete)

500 liter pressure tank, Aisi 304

• Manufacturer: Duotank

remarks: Tanks loose on frames, Aisi 304 (different versions of the frames, some screwed together; see photos); 1 hand hole each approx. 190 x 240 mm in the front bottom (plastic hand hole cover)

6350 liter heat-/ coolable tank, Aisi 304

• Manufacturer: Becker Tanks

remarks: Thermoplate for heating/cooling on one of the two side walls (not on the other side wall); 1 manhole approx. 340 x 440 mm in the front bottom; small dents in the upper bottom; various fittings inside the...

8750 liter coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

• Manufacturer: G + R W. Ortmann GmbH & Co. KG

remarks: 2 cooling plates each inside the tanks; 1 manhole approx. 300 x 400 mm in the front bottom; feet fitted with loose, height-adjustable screws (possibly no longer available for all feet; screws were not in...

6000 liter horizontal +8 bar pressure tank, Aisi 304

• Manufacturer: W. Ortmann

remarks: 1 oval manhole (approx. 420 x 320 mm) in the front bottom; 1 tank with slight differences in design (e.g., connections in the front bottom; no drawing is available for this tank); Incorrect cylinder leng...

3000 liter heat-coolable agitator tank, Aisi 316 with jet stream mixer

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Tank lid, 1.4301 (Aisi 304); 1 cut connection in the lid (see photos) agitator features: Jet stream mixer, ...

Plate heat exchanger, stainless steel

• Manufacturer: ALFA-LAVAL

Other: - Volume: 213 Liter- Design pressure: 10 bar- Design temperature: 110° C- Test pressure: 14,3 bar

1050 liter IBC container, Aisi 316

• Manufacturer: Waldner

remarks: Frame, Fe (galvanized); one of the containers is slightly higher (approx. 1,800 mm) due to a pipe in the manhole cover; this container also has 1 dip tube inside (see photos)

1100 liter insulated pressure tank, Aisi 316

• Manufacturer: Diessel

max. allowable working temperature: 130 °C remarks: Small dents in the insulation jacket; outlet fitting incomplete; one of the feet is pressed into the inner bottom (see photos)

1000 liter Container, Aisi 304

remarks: Foot frame, Fe (galvanized); wall height approx. 720 mm; Diameter manhole approx. 385 mm (the suspension of the manhole covers are no longer completely complete); Outlet diameter of pipe inside: 3 x 20 m...

900 liter tank, Aisi 316

remarks: Height-adjustable screws of the feet are partially missing (they would have to be retrofitted on site for installation, otherwise the outlet would be lower than the feet); Tanks inside partly with metall...

12600 liter tank, Aisi 316

notice: some residues of previous content, manhole cover is missing

1000 liter IBC container made of stainless steel 304

• Manufacturer: Thielmann (UCON)

remarks: Frame, Fe (galvanized; partly slightly bent or showing signs of corrosion); slight differences in the design of the containers possible; Smaller dents in the container walls are possible in some cases; s...