Used Foundry & Casting in Germany

2003 Frech Espana DAW 125 PD SBC3

• Manufacturer: Frech

Used die casting machine DAW 125 with SBC3 control for the use of zinc alloys. Available as a basis for a general overhaul at the manufacturer's plant

1995 FRECH DAW 200S

• Manufacturer: Frech

Used die casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available by arrangement The manufacturer recommends a general overhaul in the overhaul plant. This can be carried out on requ...

1999 FRECH DAM 315 S

• Manufacturer: Frech

Used die casting machine DAM 315 S with Datacontrol control for the use of magnesium alloys. Available from used machine stock. The machine is equipped with a Rauch type MMO 315E electric furnace. Without sprayin...

2018 FRECH Z20/120C

• Manufacturer: Frech

Mint and unused machine furnace for DAW20A or DAW20S. The Metec furnace type Z20/120C has a durable stainless steel crucible. Crucible capacity is 420kg, melting capacity per hour 120kg/h at 21.5kW connected load...

Mössner Gravity casting

• Manufacturer: Mössner - Rekord

Gravity casting systems for different processes and castings in highest performance as turnkey solution. Whether gravity chill casting or tilting chill casting with rotation of the mould by 90 ° or 180 ° – we sup...

Mössner HPDC high pressure die casting automation

• Manufacturer: Mössner - Rekord

Turnkey systems and individual components for die casting. Our systems technology and automation solutions take over the unloading from the casting machine, testing, cooling, sawing, deburring and mould spraying ...

Corner module cast iron

diagonal table extension flexible use as prism, support, stop, etc. With the DEMMELER corner modules, long profiles and beams can also be clamped on smaller welding tables - corner module placed in the corner and...

Cast iron stop and clamping bracket 300

steplessly adjustable and lockable three full clamping sides with system holes with slotted holes for stepless adjustment incl. fine scaling for the adjustment of the stop dimensions better sliding behaviour due ...

ProfiPlusLine stop and clamping bracket cast iron hardened 200

Infinitely adjustable and lockable Three full clamping sides with system holes With slotted holes for stepless adjustment Better sliding behavior due to combination of cast iron on steel Grid lines shorten the as...

Processing sand-lime brick

• Manufacturer: LISSMAC Maschinenbau GmbH

Select your country below so we can show you the correct information for your location.

RÖPER H 5

• Manufacturer: Laempe / Röperwerk

Single-column machine, shot volume 5 l, core box max. 440 x 600 (340) x 450 mm, manual table height adjustment, sand hopper, lever control valve, KOMAX K2-A hardening machine

2014 REISSAUS & BAUMBERG KSA 40

• Manufacturer: REISSAUS & BAUMBERG

Shooting volume 40 l, horizontal core box division, core box max. 1250x1050x980 mm, ISS continuous core sand mixer TRITON TS2 (1992), sand hopper, cabin, hydraulic unit, control panel, PLC control SIEMENS S7

VOGEL & SCHEMMANN MISCHKA III GF-S/70 'D'

• Manufacturer: Vogel

Batch max. 500 kg, hopper Ø 925 x 600 mm, discharge height approx. 1000 mm, mixing paddle, pneumatic discharge gate, drive power 10.3 kW

1994 WEBAC-MICHEL Kugelmischer M 30-A-2

• Manufacturer: Webac

Batch mixer 30 kg, steel support structure, two-part sand storage hopper, sand dosing, additive hopper with discharge screw conveyor, liquid component container storage, binder dosing system, 2 discharge points, ...