Used Lathes in Saxony, Germany

WMW lathe chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW, ROTO RECORD (without screws) used, tested !

WMW lathe chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRDA2/8-250x3 ) Jaws individually adjustable by toothing ! used, tested !

PAGUS lathe chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck PAGUS Outer Ø: 200 mm

WMW lathe chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH-B 200x3x6 ( DH-B200x3x6 ) TGL 30-2332 used, tested !

PAGUS lathe chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck with external jaws PAGUS Short cone 3 extra jaws

WMW lathe chuck

• Manufacturer: WMW

4-jaw chuck, four-jaw chuck WMW, ROTO RECORD with second set of jaws ! used, tested !

FORKARDT lathe chuck

3-jaw chucks, three-jaw chucks, power chucks, wedge bar chucks FORKARDT F 160 with 2 additional interchangeable jaw sets and one basic jaw set ! used, tested !

WMW lathe chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRFB/8-250x3 ) Jaws individually adjustable by toothing ! used, tested !

PERTHEL lathe chuck

3-Backenfutter, Dreibackenfutter PERTHEL gebraucht, geprüft !

BIAL lathe chuck

3-jaw chucks, three-jaw chucks, power chucks BIAL, BISON 2404-250 max. 3000 rpm Jaws individually adjustable by toothing ! New !

WMW NILES lathe chuck

• Manufacturer: Niles

3-jaw chuck, three-jaw chuck, lathe chuck WMW NILES Outer Ø: 250 mm 2400 rpm with cross taper and camlock D1- 8 inch (stud bolt M 16) 2 sets of jaws (1x drilling 1x turning jaw set) 1 chuck key

PAGUS lathe chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck PAGUS External ø: 250 mm | Hole circle ø (chuck): 230 mm | Bore ø: 80 mm | Height with jaws: 140 mm | Dimensions: 250 x 250 x 140 mm

WMW lathe chuck

• Manufacturer: WMW

4-jaw chuck, four-jaw chuck WMW, ROTO RECORD used, tested !

FORKARDT lathe chuck

3-jaw chucks, three-jaw chucks, power chucks, wedge bar chucks FORKARDT F 160 with 3 additional interchangeable jaw sets ! used, tested !

PAGUS lathe chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck PAGUS Was used on a Toyoda HES52 with many accessories ! used, checked !