Used Abus Hoists & Winches

Abus Type S – side-mounted hoist

• Manufacturer: Abus

SWL range 1 t - 10 t. Hook positioned beside the crane girder. Optimised highest hook position. Allows building heights to be reduced.

ABUS Winch - Type: GM1032F6-201.41.092E - 3200kg

• Manufacturer: Abus

Overrunning Capacity: 3200kg / 3.2 ton | Lifting height: 9m | Wire thickness: 7mm | Speed on hoist: 5/0.8 m/min | Load falls: 4 | H x l x w: 530 x 1200 x 1000mm | Rail width: 250mm

ABUS Winch - Type: GM1032F6-201.41.063E - 3200kg

• Manufacturer: Abus

Overrunning Capacity: 3200kg / 3.2 ton | Wire thickness: 7mm | Speed on hoist: 5/0.8 m/min | Load falls: 4 | H x l x w: 500 x 1050 x 800mm | Rail width: 200mm

Abus Type U – monorail hoist with twin trolleys

• Manufacturer: Abus

SWL range 6.3 t - 25 t. Cross travel trolley with direct drive. No exposed reduction gearing. Load is distributed over 8 wheels.

ABUS Winch - Wire Winch - Type: GM 825HG-202.41.064E - 2500kg

• Manufacturer: Abus

Subrunning Capacity: 2500kg / 2.5 ton | Lifting height: 6m | 2 speeds on lifting: 5/0,8 m/min | Wire thickness: 6.5mm | Load falls: 4

ABUS Winch - Type: GM3080H6 -323.41.064 E 160 - 8000kg

• Manufacturer: Abus

Subrunning Datasheet: ABUS - målskitse.pdf | Capacity: 8000kg | Lifting height: 6m | Speed on hoist: 8/1.3 m/min | Wire thickness: 11mm | Load falls: 4 | H x l x w: 620 x 1300 x 950mm | Rail width: 300mm

ABUS Winch - Type: GM3080H6 -323.41.064 E 160 - 8000kg

• Manufacturer: Abus

Subrunning Datasheet: ABUS - målskitse.pdf | Capacity: 8000kg | Lifting height: 6m | Speed on hoist: 8/1.3 m/min | Wire thickness: 11mm | Load falls: 4 | H x l x w: 620 x 1300 x 950mm | Rail width: 300mm

Abus ABUS calibrated hook block

• Manufacturer: Abus

Calibrated commercial scale of accuracy class III with CE-M approval, incl. Declaration of Conformity Durable DMS ring torsion load cell made of stainless steel sensor The indicated load is always in the field of...

ABUS Winch - Wire Winch - Type: GM 1032 F6-201-41-092E - 3200kg

• Manufacturer: Abus

Subrunning Capacity: 3200kg / 3.2 ton | Lifting height: 9m | 2 speeds on lifting: 5/0,8 m/min | Wire thickness: 9mm | Load falls: 4

Abus Control Components

• Manufacturer: Abus

The decentralised control system is sub-divided into separate panels on the crane bridge (SKR) and on the trolley (SKA). The centralised control system for the crane and the trolley is installed in a central posi...

Abus Installation Components

• Manufacturer: Abus

Abus LED lighting

• Manufacturer: Abus

Immediate brightness Operating temperature: -30°C to +50°C Input voltage AC 100 - 240 V, 50 / 60 Hz Protection class IP 55 Colour temperature 5000 K Over 50,000 hours of service life Over 100,000 switching cycles...

Abus Type D – standard crab unit

• Manufacturer: Abus

SWL range 1 - 63 t. Articulated end carriage joints. No hook wander or rotation with true vertical lift units. Maintenance platform as an option.

Abus End Carriages & Wheel blocks

• Manufacturer: Abus

High dimensional precision Smooth starting Smooth switching Smooth braking Maintenance-free motors Wheel flange guide Ultrasonically tested main girder connection plates Sturdy design Complete standard equipment ...

Abus Type DA - low headroom crab unit

• Manufacturer: Abus

SWL range 1 - 40 t. Minimum overall headroom dimensions. May be used where very little space is available above the crane.