Used Machine Tools in Wallonia, Belgium

Precision tool sharpening machine KAINDL

• Manufacturer: KAINDL

Support adjustable to 4 sides With scale for support pivoting Table model Stone Ø 400 mm, width 40 mm With switch

2006 Shrink-in inducion unit for tools ISCAR

• Manufacturer: ISCAR

Unit with water cooling Controlled over microprocessor

Column drilling machine FLOTT

• Manufacturer: Flott
• Model: SB15

Dimensions: Length: 700mm; Width: 400mm; Height: 1950mm Table is height-adjustable by 670mm at the column On base

Machine vice, 160 mm x 50 mm

With hand crank Clamping jaws 160 mm x 50 mm On graduated slewing ring With quick release

Heavy vice for machines, 300 mm x 160 mm

• Manufacturer: WEYHERSMÜLLER

Maximum opening 300 mm Width of clamping jaws 160 mm With crank handle

2020 Pillar drilling machine EPPLE, GB50V

• Manufacturer: EPPLE

With integrated cooling loquid pump and level vision With pivoting table gratudated and motorised lifting and hand crank, 580mm x 460mm, outreach 375mm With control box and emergency stop With drill protection Va...

Grinder and cutter 2 x Ø200mm FLOTT

• Manufacturer: Flott

Dimensions: Length: 520mm; Width: 250mm; Height: 270mm With suction nozzle

Steel circular sawing machine, brand TRENNJÄGER, Ø blade 280 mm

Type: VC 260, serial number: HK2145 Motor ACE, type AM90544/2, serial number 37903232; 1,1/1,4 kW, 1410/2800 rpm, 380 V 5 speeds (2 electrical and 3 via cone pulley) Cut 45° turn left-right With cooling water pum...

Heavy vice for machine, 250 mm x 140 mm

Weight: ± 400 kg | Dimensions: length 570 mm, width 220 mm, height 110 mm | Maximum opening: ± 250 mm | Width of clamping jaws: 140 mm

2020 Pillar drilling machine EPPLE, GB50V

• Manufacturer: EPPLE

With integrated cooling loquid pump and level vision With pivoting table gratudated and motorised lifting and hand crank, 580mm x 460mm, outreach 375mm With control box and emergency stop With drill protection Va...

Vibrating motor UHDE SM 21/4

• Manufacturer: UHDE

Weight: ± 80 kg | Motor: 1,3 kW, 220/380 V, 50 Hz, 1420 rpm

1991 Hydraulic plate shears, 3000 mm x 6 mm

Type: ONTA 3150/6,3 M, serial number: 86-2093 Year: 1991, weight: 6.200 kg Outside dimensions: length 3800 mm, width 2300 mm, height 2100 mm 21 kW, 380/660 V, 26 A With command panel 24 V With foot change lever...

Vibrating motor FRIEDRICH 5kW

• Manufacturer: Friedrich

Cos φ0.85 Weight: ±280kg | Rated voltage: Δ220V; λ380V | Rated current: Δ16A; λ9.3A | Rated power: 5kW | Nominal speed: 460rpm

Arc air device MILLER

• Manufacturer: Miller

Serial number: MJ260133C / MH430013C / MJ190047C Dimensions: Length: 1000mm; Width: 700mm; Height: 1000mm 380V, 50-60Hz