Used Machine Tools in Saxony, Germany

FORKARDT F+ 200x3

• Manufacturer: FORKARDT

Flange mounting Ø 185 mm; size Ø 200 x 25 mm, pitch circle Ø 132 mm, bolt size Ø 21mm x / M12, through-hole Ø 105mm conical Jaw connection FBG 200 Clamping range of the jaws max. Ø 200mm with chuck key incl. 26 s...

Röhm KFD-F-EC 400/3 (Nr.35)

• Manufacturer: Röhm

Merkmale: automatisches spannen Kraftspannfutter Flanschaufnahme Ø 298 x 32mm Fmax: 110 kN Fges. 250 kN 6 Formbacken

WMW 600x3

• Manufacturer: WMW

3-jaw chuck with internal jaws flange Ø 730 x 10mm (pitch circle bore Ø 680mm) 1 set of external jaws 1x chuck key

WMW PS 1000

• Manufacturer: WMW

Equipment: -4x external/internal jaws; clamping range min./max.: approx. Ø 320mm / max.: approx. Ø 900mm; clamping stroke approx. 200mm -Clamping slots according to DIN 650: a=22mm; h=43mm; b=38mm; c=15mm x lengt...

VEM magnetic coupling

• Manufacturer: VEM

Magnetic coupling VEM Dessau 4KL 20 ( 4KL20 ) TGL 9922/04 ( TGL9922/04 ) Ø 50 mm 1 groove, width 14 mm 3 clutch disks used, tested !

ALLMATIC carrier jaw for gripper inserts

• Manufacturer: ALLMATIC

Carrier jaw for gripper inserts, mobile, pendulum ALLMATIC - JAKOB 2334/125 Including 2 cylinder screws DIN 912 M10x1.5 x 20 mm used, tested !

PAGUS pipe vice

• Manufacturer: Pagus

Pipe vice, round material vice PAGUS with stop, max 250 mm jaws rotatable ! used, tested ! very good condition !

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 used, tested !

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 including one set of stepped jaws ! used, tested !

PST 1,3

• Manufacturer: PST

3 chip containers (blue) type PST; capacity = 0.6 m³ Tipping angle approx. 45° for emptying Base frame size 1000mm x 1000mm x 180mm Sheet metal construction 8 mm thick 4 eyebolts for crane lifting

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 130 x 3 ( DH315x3 ) TGL 30-2333 Thread: M18 x 1.5, length: 20 mm ( left-hand thread ) bore: Ø 30 mm, depth: 55 mm used, tested !

ROTO RECORD 3-jaw chuck

3-jaw chuck, three-jaw chuck ROTO RECORD, WMW DH 315 x 3 ( DH315x3 ) TGL 30-2333 3x threaded hole: M12 x 1.75, depth: 30 mm used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 centering Ø: 139 / 135 mm, depth: 19 mm ( conical ) used, tested !

TOS 3-jaw chuck

• Manufacturer: TOS

3-jaw chuck, three-jaw chuck TOS 100/3-1-M1 New ! N: max. 5300 rpm | Outside ø: 100 mm | Centering ø: 80 mm | Hole circle ø (chuck): 90 mm | Bore ø: 23 mm | Height with jaws: 69 mm | Dimensions ( lathe chuck ): 1...

ROTO RECORD 3-jaw chuck

3-jaw chuck, three-jaw chuck ROTO RECORD, WMW DH 200 x 3-III ( DH200x3-III ) TGL 30-2333 New !