Used Earthmoving Attachments & Accessories in Australia

1993 Custom 24 Inch 3 Row Compaction Reel

Custom 24-inch 3 row compaction reel Head pins 90mm PCD 205mm b/ears 205mm In good condition Will be sold on an "as is where is" basis

Branson BH76E

• Manufacturer: Branson

New Branson BH76E Backhoe Attachment C/w 400mm Dig Bucket To Suit Tractor

Emu EDL 25R

• Manufacturer: Emu

New Emu EDL 25R Front End Loader C/w 1700mm 4 In 1 Bucket To Suit Tractor

CAPTOK | TILT MUD BUCKETS FOR SMALL EXCAVATOR

Priced from $1,000 each 1000mm tilt mud there are 3 available $1,500 each 600mm tilt mud there are 3 available $1,000 each

Forks

• Manufacturer: Ahern Australia

Fork with claw

• Manufacturer: Ahern Australia

Fork with 3 hinged needles

• Manufacturer: Ahern Australia

Tyre handler 3.5T - Magni

• Manufacturer: Magni

Tyre clamp, 3,500 kg capacity, for 35″ tyres. Hydraulic opening/closing. Clamp rotation (clockwise/anticlockwise): +/- 24°; tyre rotation +/- 61°. This attachment is available for RTH range and for HTH 10.10 model.

Tyre handler 3.8T - Magni

• Manufacturer: Magni

Tyre clamp, 3,800 kg capacity, for 49″ tyres. Hydraulic opening/closing and 360° rotation. For HTH range, it is available only for 10.10 model The OPT-02-022 “Double Hydraulic Output at the Boom Head”, required t...

Tyre handler 2.5T - Mangi

• Manufacturer: Magni Attachments

Tyre clamp, 2,500 kg capacity, for 25″ tyres. Hydraulic opening/closing. For HTH range, it is available only for 10.10 model. The OPT-02-022 “Double Hydraulic Output at the Boom Head”, required to use the clamp, ...

Hook 8T - Magni

• Manufacturer: Magni

Type-approved hook with latch, high-strength alloy steel. Capacity up to 8,000 kg. Metal storage support included in code. This attachment is available for RTH, HTH and TH range.

Hook 6T - Magni

• Manufacturer: Magni

Type-approved hook, high-strength alloy steel. Capacity up to 6,000 kg. Metal storage support included in code. This attachment is available for RTH range and HTH 10.10 model.

Cylinder handler 4.5T - Magni

• Manufacturer: Magni

Clamp for the maintenance, replacement and movement of large excavator cylinders up to 4,500 kg and max ø 450 mm. Clamp side shift +/- 300 mm, 360° clockwise/anticlockwise clamp rotation, and +/- 27° cylinder rot...

Rib handler 4T - Magni

• Manufacturer: Magni

Clamp made of high-strength material for positioning the ribs comprising the supporting arches for tunnel construction. This attachment is compatible with the model HTH 10.10 and RTH and TH ranges.

Coils Handler 22T (CLAMP) - Magni

• Manufacturer: Magni

Attachment designed specifically for moving large steel coils in heavy industry, with diameters from 1,200 mm up to 1,600 mm. Pin inclination +/- 90° and pin side shift +/- 300 mm.