Used Food Inspection & Safety in Canada

Alliston Machinery 48" Brush Washer With Sponge Drying Section

• Manufacturer: Alliston

Fully stainless 48" brush washer with sponge drying section, adjustable height, collection tray, spray bars (needs new nozzles) and 2" trash pump that is like new. Single phase power. Located in Tillsonburg. Deli...

Backsaver BRL Barrel Tipper

• Manufacturer: Dpec Food Solutions

Approx. dumping height: 970 mm / 38.2" | Tipping angle: 0-100 deg. | Load rating: 300 kg / 630 lbs | Ip rating: IP56 (limited dust ingress; strong water jets, any direction) | Power source: 12-volt deep-cycle / ...

Backsaver ST Standard Tipper

The Backsaver ST Standard tipping machine is designed to empty large plastic bins, tubs or crates at a work table height. It can also be customized to handle dough-mixing bowls, standard bins, barrels and other c...

30″ Slanted Edge Tan Gum Squeegee

• Manufacturer: Seal-Rite

30″ Slanted Edge Tan Gum Squeegee. Great for cutting in – leaves the least amount of sealer. This product is eligible for a quantity discount! (Purchases of 12 or more receive a 12% discount) The tan gum slanted ...

Blue 10 Gallon Replacement Thermometer

• Manufacturer: Seal-Rite

Replacement Thermometer for MA10 wheeled melters and 10 gallon stationary melters.

Turntable

47" diameter stainless steel turntable. It has 4.25" tall side rails. Variable speed controls. It's currently 30.5" from the floor but has height adjustable legs. In good working condition. Last used in a food fa...

Used Eriez Magnetics Magnet Trap, 10'' x 12.5''

• Manufacturer: Eriez

-manufacturer: Eriez Magnetics -model: TGH.2 -serial no. T977186 -eleven (11) removable magnetic bars -inlet & outlet:10'' x12.5'' -previous use: food application

Used Urschel Comitrol, Model MG, 30 HP

• Manufacturer: Urschel

-manufacturer: urschel -model: mg -serial no. 1240 -motor: 30 hp, 575 volt, 3550 rpm -top cone inlet: 13.5'' diameter -discharge: 3'' diameter -mounted on a stainless steel frame -previous use: food applic...

Used Industrial Magnetics Magnet Trap, 10'' x 8''

• Manufacturer: Industrial Magnetics Inc.

-manufacturer: Industrial Magnetics Inc. -serial no. IMH0808C3EZB422 -seven (7) drawer type magnetic bars -inlet:10'' -discharge: 8'' x 8'' -with slide rails for clean in place design -previous use: food ap...

Used Mac Process Inline Dry Bulk Magnet Trap, 2''

• Manufacturer: MAC PROCESS

-manufacturer: mac process -model: bm2500 rez -length: 36'' -port diameter : 2'' -bullet style magnet -flat to flat seal design -inline pneumatic conveying -traps any metals -stainless steel construction ...

Used Mobile Stainless Steel Adjustable Chute

-adjustable discharge chute with five (5) different angle settings -dimensions: 48.5'' wide x 35'' long x 2'' deep -all stainless steel construction -with liquid discharge outlet -chute mounted on a stainless...

Used Urschel Slicer, Model CC-D

• Manufacturer: Urschel
• Model: CC-D

-manufacturer: urschel -model: cc-d slicer -serial no. 3564 -motor: 5 hp, 208.230/460 volt, 1750 rpm -top cone inlet: 17'' diameter -discharge: 17'' diameter -stainless steel control box -mounted on a stai...

Glatt Cip system pumpskid 3 pumps #104925

• Manufacturer: Glatt

Glatt Skidpump CIP System Model AE VSP11 3 Pumps system

Urschel Dicer model ra-d dicer #33145

• Manufacturer: Urschel

URSCHEL LABORATORIES MODEL RA-D URSCHEL DICER Urschel Dicer Model RA-D all in stainless steel. SERIAL #2378 WITH BALDOR SUPER EFFICIENT INDUSTRIAL MOTOR HP:10 VOLTS 230/460 R.P.M:1760 PH:3. TYPES OF CUTSDICES...

Winston Holding Cabinet Model HOV704UV

• Manufacturer: Winston

Made in the USA Category:Holding CabinetSize:35.91″ x 34.23″ x 27.7″Capacity:4 Sheet Pans 8 Half Sheet Pans 8 Hotel PansShip Weight:198 Lbs/90 KgNEMA5-20P (1 Phase/120V) The Winston Holding Cabinet Model HOV7...