45pcs Tap And Die Set High Speed Steel, 20 Thread Sizes (INCH), See Description
used
- Manufacturer: Japan
45pcs Tap And Die Set High Speed Steel, 20 Thread Sizes, See Description Made In Japan 45 Pcs Set Of Taps And Dies National Course And Fine Thread Sizes High Speed Steel No Imperfections "Complete Combination Set...
Watertown, CT
Hypneumat LS300E 8706-B Tapping Unit W/1Hp Motor 3Ph 230/460V & Gear Reducer
used
- Manufacturer: Hypneumat
Hypneumat LS300E 8706-B Tapping Unit W/1Hp Motor 3Ph 230/460V & Gear Reducer 3" Stroke Pacemaker Main Motor Drive 230/460 Volt 3Ph Cont Duty Pacemaker Gear Reducer Input Rpm: 1800/Output Rpm: 280 6.2 Ratio FMC St...
Watertown, CT
REED Model A22 Vertical Cylindrical Die Thread Roller w/ Tooling
used
- Manufacturer: Reed
- Model: A22
Comes with 3 or 4 Sets of Dies Vertical Cylindrical Die Thread Roller Specifications From Web:
Watertown, CT
Enkotec Type TA01 Thread Rolling Machine
used
capacity: up to 2,500 nails per minute nail length: 32-105mm (1-1/4″ – 4.1″) nail shank dia.: (intervals): 1.8-2.5mm (.071″-.098″), 2.3-3.4mm (.090″-.134″), 3.2-4.2mm (.126″-.165″) profile height (min.-max.): 27-...
Bristol, CT
Enkotec Type TA01 Thread Rolling Machine
used
capacity: up to 2,500 nails per minute nail length: 32-105mm (1-1/4″ – 4.1″) nail shank dia.: (intervals): 1.8-2.5mm (.071″-.098″), 2.3-3.4mm (.090″-.134″), 3.2-4.2mm (.126″-.165″) profile height (min.-max.): 27-...
Bristol, CT
FLEXARM GHR-30 Hydraulic Tapping Arm 360° Swivel 480volt w/ Tooling
used
- Manufacturer: Flexarm
Table is not Included. Comes with Extra tooling (16 Quick Change Tap Holders) Shown in pictures 360° Movement RPM 140 / 500
Watertown, CT
GEOMETRIC 9/16" "DS" STYLE THREADING DIE HEAD w/ 3/4" SHANK
used
- Manufacturer: Geometric
GEOMETRIC 9/16" "DS" STYLE THREADING DIE HEAD w/ 3/4" SHANK Comes With Set of Chasers Installed Asset In Stock And Available Immediately GEOMETRIC 9/16" "DS" STYLE THREADING DIE HEAD w/ 3/4" SHANKMake: Geometric ...
Watertown, CT
Hartford Model A-190 R Automatic Thread Roller w Bowl Feeder – Nice
used
- Manufacturer: Hartford
Model R Unit – Vibrator Feeder bowl and track – included in one unit • 250 Pieces per minute Max speed • Metric = 2mm – 5mm Diameter x 4mm – 38mm Long • 230 Volts, 3 Phase Power • 2 units available – twins but n...
Watertown, CT
Jarvis Cutting Tools 5/8-18 H10B 6LG JARFLO VHP-CO Made In THE USA
new
- Manufacturer: Jarvis Cutting Tools
Jarvis Cutting Tools 5/8-18 H10B 6LG JARFLO VHP-CO Made In THE USA $25 Each $290 For All Of them HSS Tap 13 in Stock And available Immediately Jarvis Cutting Tools 5/8-18 H10B 6LG JARFLO VHP-CO Made In THE USAMak...
Watertown, CT
Reed Rico Model B-13 1/8"-13/16" Roll Thread Attachments W/1" Max Thread Length
used
- Manufacturer: Reed
Reed Rico Model B-13 1/8"-13/16" Roll Thread Attachments W/1" Max Thread Length Advance and Alignment Compensators Anti-Friction Bearings Simple Prccise Roll Matching Dovetail Clamping Arrangement Please Note Pri...
Watertown, CT
Hypneumat S24 Basic 4" Stroke Tapping Unit w/ Procunier 2 Attachment
used
- Manufacturer: Hypneumat
4" Stroke Horizontal Tapping Unit Procunier Model: 2 Series: 12039 Tapping Attachment no Collets included Dayton Gear motor 2Z849 Ratio: 11:1 Asset In Stock And Available Immediately
Watertown, CT
Tip: Enter manufacturer, model or keyword