Used Processing in New Jersey, USA

Cytiva 6098 Column - IPP# 239339

• Manufacturer: Cytiva

2000 Liter/Hr., 316 SS, polished to 180 grit finish, modular chromatography system, manufactured by Cytiva/GE- ATKA system # 6098 6 inlets, 4 outlets, two column connection, five head diagram pumps. Rated for 6 b...

Centrifuge-Disc Bowl 30 kW (40.2 HP) Stainless Steel - IPP# 220241

• Manufacturer: Disco

manufacturers #881150-02-S-03-SK-02-0259 feed density 1110 kg/cm3 sediment density 1251 kg/cm3 control fluid density 1000 kg/cm3 process temperature 0-100 deg C 438mm diameter bowl Swep 316 s/steel (1.4401) plate...

Still Stainless Steel 316 - IPP# 230720

• Manufacturer: Steris Finn-Aqua

4700 lbs/hr Pure Steam Generator Falling film design to remove pyrogenic material Steam heated. Electricals rated 3.0 kW, 480 volt, 60 cyc, 5.2 amp with 0.5 kW 120 volt 4.2 amp, 60 cyc controls. All product surfa...

Stainless Steel 316 Rieter (Maag) M-USG 900 V Major Items Plastic - IPP# 233810

• Manufacturer: Rieter

Type: Underwater strand pelletizing system Complete system includes the Rieter M-USG 900 V cutter. strand transfer equipment, pellet cooler and screener The cutter IPP Stock # 205766- Rieter (Maag) the vertical d...

Stainless Steel 316 Rieter (Maag) M-USG 900 V Major Items Plastic - IPP# 233813

• Manufacturer: Rieter

Underwater strand pelletizing system Cutter included: Rieter M-USG 900 V Strand transfer equipment included Pellet cooler included Screener included The cutter IPP Stock # 205764- Rieter (Maag), M-USG 900 V Under...

Stainless Steel 316 Rieter (Maag) M-USG 900 V Major Items Plastic - IPP# 233811

• Manufacturer: Rieter

Type: Underwater strand pelletizing system Components: Rieter M-USG 900 V cutter, strand transfer equipment, pellet cooler, and screener The cutter IPP Stock # 205765- Rieter (Maag), M-USG 900 V the vertical desi...

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 203934

• Manufacturer: Heinkel

inverting filter centrifuge Rated 1150 RPM Solid Haynes Hastelloy C22 for all process parts 316SS for balance of exterior parts Clean in place nozzles for solids and filtrate housings Polished to 180 grit and ele...

Stainless Steel Austenitic Chema Balke Dürr GmbH Batch-Type Agitated Reactor - IPP# 235800

• Manufacturer: Dürr

1.4529 SS (AL-6XN super-Austenitic SS) fermenter/ reactor with internal cooling coil and sparge ring for gas addition Polished stainless steel interior motor : 3/50/380 volt Bergmann double mechanical seal on sha...

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216002

• Manufacturer: Trane

CentraVac Low temperture, Series R chiller Drive motor: 197 kW, rated for 460 volt, 3 ph, 60 Hz Requires 705 lbs Evaporator rated for 40% Glycol at 428 gpm, inlet at 33.8 degrees F, and outlet at 25 degrees F. Co...

- IPP# 211968

• Manufacturer: Airoil-Flaregas

Airoil-Flaregas F.C.10 flare tip, Pilots Derrick supported Flare stack, Customer ref #62/3336085/2H1/ON, The FC.10 flare tip inclusive of the Flarex molecular seal, Derrick supported flare stack and Knock out dru...

Major Items Plastic Stainless Steel 316 - IPP# 205765

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temp...

Major Items Plastic Stainless Steel 316 - IPP# 205766

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer cutter the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Me...

Stainless Steel 316 Centrifuge-Lab - IPP# 239309

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

Stainless Steel 317 Andritz SZ400/2 Centrifuge-Pusher - IPP# 232766

• Manufacturer: Andritz

316 stainless steel 5.5 ton/hour troughput of solids 130 degrees C (max) inner diameter of outer basket 412mm, inside diameter of inner basket 356mm cake thickness of outer basket 41mm (max), inner basket 40mm ce...

IPP# 601964, PET Cutter System-(4) cutters-6900 kg/hr max. (ea) Polymers - Fibres and Plastics

PET Cutter System consisting of: (4) Rieter (Maag) Underwater strand pelletizers ( M-USG 900 V) vertical design (providing space savings and easy access to the cutter head) 316 SS contact Each System is Designed ...