Used Molding Presses in Lombardy, Italy

MILLUTENSIL PRESS MOD.MIL 143

• Manufacturer: Millutensil

MILLUTENSIL 10128 MILLUTENSIL MIL 143 MOLD TESTING PRESS Useful table length mm 1400 Useful width of table mm 1200 Max passage between columns on length mm 1540 Max passage between columns on the width mm 1300 T-...

PROOFING PRESS PFC PR2

PFC 09950 USED MOLD TESTING PRESS Removable and tilting table Closing force max Ton 20 Max opening force Ton 10 Upper table dimensions mm 750x1100 Lower table dimensions mm 750x1100 Opening min max 85- 985 Movabl...

GALATO T35 TL/V-SM PRESS

• Manufacturer: Galato

GALATO 09935 C-NECK PRESS Nominal force: 350 kN Adjustable stroke: 11-78 mm Strokes per minute: 122 Slide adjustment: 50 mm Clearance at bottom dead center: 275 mm Maximum clutches per minute: 35 Maximum flywheel...

MOSSINI PRESS 250 TON

• Manufacturer: Mossini

MOSSINI 10141 MOSSINI OLEODYNAMIC PRESS mod. PO/2M/P 250 Nominal force Ton 250 Slide stroke mm 1,000 Worktable dimensions mm 2,500 x 2,000 Max. workpiece dimensions mm 2,400 x 1,900 Max. workpiece weight kg 5,000...

PRESSIX T50 CNR4 PRESS

• Manufacturer: Pressix

PRESSIX 10357 C-NECK PRESS Nominal force: 500 kN Weight: 3,500 kg Strokes per minute: 90 Maximum insertions per minute: 41 Min./max. operating air pressure: 4-5.5 bar Stop time: 0.117 s Safety distance: 187 mm En...

1995 UTAS GR3 Mold Testing Press

Mold Testing Press UTAS GR3 year 1995 with control unit, cycle programming keyboard, wax injector device.

Mold Testing Press UTAS GR2

Max closing force: 200/400 KN | Max opening force: 100/200 KN | Plan size: 750x1100 mm | Max mold weight: 5000 kg | Upper mold max weight: 2000 kg | Closing/opening speed: 50/65 mm/sec | Closing/opening pressure...

Kurtz K810 Press

• Manufacturer: Gobid

Kurtz K810 Press Brand: KURTZModel: K810Year of manufacture: 1992Table size: 800 1000 mmType: EPS molding pressIndicative features:Steel structure with vertical closureElectromechanical control via control panelE...

TCS 300 TON MOLD TEST

TCS 10164 Closing force 300 Ton Moving plane opening force 100 Ton Operating pressure 250 bar Platen overall dimensions 3,500 x 2,500 mm Minimum mold size (at max. clamping force) 2,800 x 2,000 mm Minimum clearan...

2006 Millutensil MIL 203

• Manufacturer: Millutensil

MILLUTENSIL MIL 203 mold testing press year 2006 Max closing force: 1500 KN | Max opening force: 350 KN | Plan size: 2000x1500 mm | Max mold weight on the bottom plane: 30000 kg | Max mold weight on the top plate...