Used processing

Extruder 58 mm (2.3 in) - IPP# 210304

• Manufacturer: Werner & Pfleiderer

twin screw extruder Electric heated barrel with water cooled jacket 84” long (Consisting of 9 blocks each 9.45"), 2.2” diameter discharge Rated for 96 Kpm torque per shaft or 960Nm Outer screw diameter is 57.8 mm...

Black Clawson Davis Standard Extruder (2009)

• Manufacturer: Black Clawson

Model: 4.5 EXTR B | Extruder #1 & #2: 2.5", 30:1 L/D Ratio | Extruder #1 & #2 throughput: 90-100 Lbs/Hr (Approx.) | Extruder #3: 4.5", 30:1 L/D Ratio | Extruder #3 throughput: 1,000 Lbs/Hr (Approx.) | Material p...

Extruder 38.1 mm (1.5 in) Aluminum - IPP# 78337

• Manufacturer: Sterling

Sterling Having 3-zone electrically heated water cooled non-vented Xaloy 306 lined barrel. Barrel water cooling system utilizes cast aluminum heaters in a closed loop system including reservoir pump and heat exch...

Extruder 65 mm (2.6 in) Carbon Steel - IPP# 706693

• Manufacturer: APV

twin screw Ko-Kneader system, (1) Baker Perkins 800mm diameter chilled drum roll cooler, series 2000, serial #65712, drum with pre-breaker and Kibbler granulator, granulator driven by 10HP, 1500 rpm motor, pre-br...

Bone Brothers Extruder 63mm - IPP# 706425

63mm, single screw extrusion line, approx 60 kg/hr of 800mm wide plastic sheet), line consists of: (1) Bone Brother 63mm x 2m long c/steel single screw extruder, motor with cooling fan, barrel with (5) fans drive...

Extruder - IPP# 706267

• Manufacturer: SMS Buss

with chrome screw and chrome lined barrel. Jacketed barrel for cooling, hinged longitudinally for cleaning and maintenance.

Aluminum Extruder - IPP# 705278

• Manufacturer: Henry Simon

single screw plodder/extruder. Production rate: 500 Kg/hr maximum (soap) Worm speed ? rpm Cast iron barrel and removable nose cone, both with aluminum lining, aluminum worm screw. Barrel with cooling/heating jack...

Extruder 20 mm (0.79 in) Carbon Steel - IPP# 703671

Bone Brothers lab size single screw extruder. Unit has (4) electrically heated zones. Unit is complete with 7" diameter x 5" high stainless steel feed hopper cooling bath and control panel.

Extruder - IPP# 237088

• Manufacturer: Mazzoni

Plodders Rated for 220 bars per minute

Extruder - IPP# 237025

• Manufacturer: Mazzoni

Plodder Rated 2,000 kg/Hr.

Carbon Steel Axon PXR-60D Extruder - IPP# 224194

• Manufacturer: Axon

Axon carbon steel Single screw extruders system throughput of approximately 5 ton/hour screw driven by 30kw, 3/50/380/660 volt system includes (1) 15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry gran...

Extruder 60 mm (2.4 in) Carbon Steel - IPP# 224193

• Manufacturer: Axon

Axon carbon steel Single screw extruders system throughput of approximately 5 ton/hour, screw driven by 30kw, 3/50/380/660 volt, system includes (1)15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry gra...

American Kuhne Sheet Line

• Manufacturer: Kuhne

L/D Ratio: 30:1 Gearbox Ratio: 17.45:1 EQUIPPED WITH : BKG Blue Flow EP-0115-SE-U Melt Pump Pre-FAT Testing Communications Testing with Downstream Spare Parts Package (For Extruder) Deckle Capabilities System...

2018 Purui SJ200/200

• Manufacturer: Purui

Dual stage 8“ single screw pelletizing system MFG: Purui, Model: SJ200/32, MFG Date: 2018 2.Screw diameter：200mm 3. AC motor power：250kW 4.Rotate speed：10~100rpm 5.Cooling method：force wind cooling 6.Lubrication ...

2021 Jennings E-50

• Manufacturer: Jennings

50 Ton Electrical Requirements Extruder: Preformer: