Used Machine Tools in Oregon, USA

SCM Model M2 Gang Ripsaw

• Manufacturer: SCM / SCMI

Used SCM Model M2 Gang Ripsaw 7-15/16" width cap. 4-1/2" max. depth of cut 23-9/16" throat depth Minimum board length: 14" 70mm arbor with two 20 mm x 5 mm keys for 12" to 14" dia. saw blades 36 HP motor main mot...

Armstrong Bandsaw Sharpener, No. 4 Left Hand Automatic Bandsaw Sharpener

• Manufacturer: Armstrong

Armstrong No. 4 Left Hand Automatic Bandsaw Sharpener, serial no. 12702. Later model unit for bandsaws from 6” to 14” wide. Includes cams (subject to cams we have in stock), carbide face plate, and set of post ...

Late Model Wadkin Model CP12 Heavy Duty Tilting Arbor Sliding Table Panel Saw

• Manufacturer: Wadkin - Bursgreen

Used Late Model Wadkin Model CP12 Heavy Duty Tilting Arbor Sliding Table Panel Saw, S/N 87333. 12" diameter blade tilts either left or right 45�. 3-1/2" tall fence opens 26" right of saw and left stops go out to ...

Late Model Wadkin Model CP12 Heavy Duty Tilting Arbor Sliding Table Panel Saw

• Manufacturer: Wadkin - Bursgreen

Used Late Model Wadkin Model CP12 Heavy Duty Tilting Arbor Sliding Table Panel Saw, S/N 87333. 12" diameter blade tilts either left or right 45�. 3-1/2" tall fence opens 26" right of saw and left stops go out to ...

Armstrong Bandsaw Sharpener, Right Hand Pro-Filer Automatic Bandsaw Sharpener

• Manufacturer: Armstrong

Armstrong Right Hand Pro-Filer Automatic Bandsaw Sharpener for both Stellite and Swaged tooth saws. Built-in diamond wheel dresser. Variable speed motors for grinding wheel and saw tooth feed rate. Air clamp. ...

Invicta Panel Saw, 2-Saw, 10' Wide Sliding Table Panel Saw

Used Invicta 2-Saw, 10' Wide Sliding Table Panel Saw. Model RP31 Tetra "A". Built in 2002. Adjusts from 12" to 120". Saw stations are both adjustable to 45 degrees. Main saw motors are approx. 5HP and have 1...

New Oliver Cut-Off Saw, Model 5025.002 18" Cut Off Saw

One (1) New Oliver Model 5018.002 18"Left Hand Cut Off Saw with 7-1/2HP 3 phase motor prewired for 230 volts. 3450 RPM arbor speed. Left Hand Model uses an 18" diameter saw blade with 1" bore (saw blade not inc...

Invicta 2-Saw, 10' Wide Sliding Table Panel Saw

Used ) Invicta 2-Saw, 10' Wide Sliding Table Panel Saw. Model RP31 Tetra "A". Built in 2002. Adjusts from 12" to 120". Saw stations are both adjustable to 45�. Main saw motors are approx. 5HP and have 14" di...

New Oliver Cut-Off Saw, Model 5015.002 14" Cut Off Saw

One (1) New Oliver Model 5015.002 14" Cut Off Saw with 7-1/2HP 3 phase dual voltage motor prewired for 230 volts. 4100 RPM arbor speed. Left Hand Model uses a 14" diameter saw blade with 1" bore. Cuts boards u...

SELCO Model EB100 Front Load Horizontal Beam Panel Saw

• Manufacturer: Selco

Used SELCO Model EB100 Front Load Horizontal Beam Panel Saw Max. Cutting Length: 3800mm - Max. Pusher Stroke: 3200mm - Max. Blade Projection: 100mm - Max. Gripper Opening: 97mm - Automatic Side Squaring Device - ...

SAFETY SPEED CUT Model 7400 Vertical Panel Saw

One Used SAFETY SPEED CUT Model 7400 Vertical Panel Saw (American made) Standard Equipment � 3 Hp continuous duty induction saw motor, 7.6 amps 230 volt 3 phase with optional Scoring Blade � Maximum crosscut 6...

Industrial Model N510R Right Hand High Speed Chop Saw, Air Lift

Industrial Model N510R Right Hand High Speed Chop Saw, Air Lift. 7-1/2 HP 208-230/460V motor, 2" X 12" capacity. Adjustable cycle speed up to 90 strokes per minute. Requires compressed air at 60 PSI minimum at...

Industrial Model N510L Left Hand High Speed Chop Saw, Air Lift

Industrial Model N510L Left Hand High Speed Chop Saw, Air Lift. 7-1/2 HP 208-230/460V motor, 2" X 12" capacity. Adjustable cycle speed up to 90 strokes per minute. Requires compressed air at 60 PSI minimum at ...

Precision Model 18 Left Hand, Air Operated, 2" X 12" Capacity High Speed Pneumatic Chop Saw

One (1) Used Precision Model 18 Left Hand, Air Operated, 2" X 12" Capacity High Speed Pneumatic Chop Saw. Includes 12' stop bar. See photos of Precision Model 18 Left Hand, Air Operated, 2" X 12" Capacity High ...

Armstrong Bandsaw Sharpener, No. 4 Right Hand Bandsaw Sharpener

• Manufacturer: Armstrong

Armstrong No. 4 Right Hand Bandsaw Sharpener, Older Model but with many modern upgrades, complete with Sequoia Saw Systems DigiCam Programmable Tooth Pattern System. Now supported by Wright (Burton Saw), this sys...

Fadal VMC-4020HT Machining Center

• Manufacturer: Fadal
• Model: VMC-4020HT

Good condition Fadal VMC-4020HT Machining Centers available between 1994 and 2008 years. Located in USA and other countries. Click request price for more information.